OFFICIAL "INTEREST" THREAD -- Polk Terminal Cup Replacement, Aluminum Round Vintage

[VR3]

Will be sending off the terminal cup Monday! :)

[VR3]

Small addendum to the plan, after looking at Tony's design and a request from Andre,

Instead of four binding post holes - there will be points on the back of the plate for the exact spot to drill if you needed the top post. I will drill these for free if someone needs these posts!

Thanks!

[Moose68Bash]

Small addendum to the plan, after looking at Tony's design and a request from Andre,

Instead of four binding post holes - there will be points on the back of the plate for the exact spot to drill if you needed the top post. I will drill these for free if someone needs these posts!

Thanks!

Trey,

I'm not clear, now, about the plates.

I want holes for four binding posts in each plate and a hole for the Neutrik Speakon connector for the Dreadnought cable.

You will drill these holes (or other configurations) for those who want them?

Thanks,

Phil

[VR3]

Hey Phil!

You are correct! It made more sense to do it this way since some speakers like your 1C only have two...

No plugs, no fuss! :)

With the preset points on the back I just drop a drill bit into place and hit the trigger and we are in business for four binding post! :)

Sorry for the confusion!

[Moose68Bash]

Trey,

Thanks.

So, the pair for the SRSs will come with holes for the Neutrik connector and four binding posts, and the pair for the 1Cs will have a hole for the Neutrik connector and for two binding posts.

Correct?

Will you have the plates in time to use them for the 1Cs before you return the crossovers and cups/plates to me?

Cheers,

Phil

[VR3]

Hey Phil!

This whole process assuming collecting funds go smoothly will take approximately 2 weeks or so. So we might be in a good time frame.

you are correct on the arrangement as far as post holes. 4 and 2.

[sda2mike]

you'll be pm'ing in regard to payment?

thanks
mike

[VR3]

Yessir! Shipping off the terminal today, will have word on finalized pricing and I will let you guys know!

thanks!

[VR3]

Shop received the cup today, will have word by Monday. I also ordered a crap load of NL2 connectors if you guys needed.

[Toolfan66]

I also ordered a crap load of NL2 connectors if you guys needed.

I need 4 Females and 4 Males

[Moose68Bash]

I need four (4) females. Hopefully, you can install two of them on the 1C plates befor shipping!

[VR3]

Question that you bring that up, do you want the stock terminal cups to have a NL2 AND the plates or just the plates?

And yes, I would like four females too.. >_>

[Moose68Bash]

Question that you bring that up, do you want the stock terminal cups to have a NL2 AND the plates or just the plates?

And yes, I would like four females too.. >_>

Well said, Trey! That is, the four females, too, thing!

Because I don't plan to use the stock cups ever again, I don't think they need the NL2s, just the new plates -- that's assuming the new plates come ready to be installed with the new crossovers.

[VR3]

THIS IS A FINAL 48 HOUR NOTICE!

I plan on these being ready to collect money for in the next 48 hours. The price looks like it may be in the $27.99 each range + shipping/paypal. Shipping will be $6.50 for an order (USPS flat rate box).

Here is the current list -

1 Pair (2) - Davemuell
2 Pair (4) - Moose68Bash
1 pair (2) – SDA2Mike
1 pair (2) – Polkiemaster1
2 pair (4) – Denzel
1 pair (2) – Drenis
2 pair (4) – Michael1947
1 pair (2) - Nooshinjohn

[Toolfan66]

Hit up gimpod !!!

[VR3]

He does not like the flat design... :-P

[Toolfan66]

Oh yeah I forgot!!

[sda2mike]

pm sent

[michael1947]

What are the nl2s connectors, speaker terminals or inside wire terminals, do you think I will need some? Thanks, Mike

[VR3]

Hey guys!

I appreciate all of the PMs so far. Once I have the official pricing from the CNC shop I will send everyone a PM with regards to connector pricing, loading them on the plate, converting old SDA cables to the NL2 connection, the works!

Please stand by! :)

Thanks!

[VR3]

Here is an official mock up from the CNC shop

[Moose68Bash]

Trey,

Just let me know what to send via PayPal, when you have the final costs.

Thanks,

Phil

[VR3]

Sent PM as of a minute ago. If you did not receive a PM please email me at Vr3Mods@gmail.com or reply here. Thanks! :)

[VR3]

I have received payment so far from -

SDA2MIKE

The following remains - If for some reason you are no longer interested please let me know via PM or in email.

Thanks! :)

1 Pair (2) - Davemuell
2 Pair (4) - Moose68Bash
1 pair (2) – Polkiemaster1
2 pair (4) – Denzel
1 pair (2) – Drenis
2 pair (4) – Michael1947
1 pair (2) - Nooshinjohn

[VR3]

I have received payment from -

SDA2MIKE
POLKMASTER1
MOOSE68BASH
DRENIS

The following remains -

1 Pair (2) - Davemuell
2 pair (4) ? Denzel
2 pair (4) ? Michael1947
1 pair (2) - Nooshinjohn

[VR3]

Someone brought up an interesting idea to use these with non SDA speakers... and this is very possible.

The pricing would remain the same but there would be no NL2 hole.

If you would be interested in this - feel free to stake interest and email me at Vr3Mods@gmail.com

[VR3]

Hey guys,
The plates are officially ordered.

still awaiting payment though for some...

Thanks!

[VR3]

Update -


SDA2MIKE
POLKMASTER1
MOOSE68BASH
DRENIS

In Contact With -

Denzel

The following remains -

1 Pair (2) - Davemuell
2 pair (4) ? Michael1947
1 pair (2) - Nooshinjohn

[Toolfan66]

Is the Polk logo going to be engraved into them?

[VR3]

There was 24 sets made -

Payment Received from -

SDA2MIKE x 2
POLKMASTER1 x 2
MOOSE68BASH x 4
DRENIS x 2

Pending -

Local - x 2
Another mod - x2

In Contact with the following -

Toolfan66 x 2
Denzel x 6
Nooshinjohn x 2

Total Paid For/Pending -

24

If the below needs a set of these I need to know by end of the day or this will seal the fate of this as this is a minimum of 20 piece order.

1 Pair (2) - Davemuell
2 pair (4) – Michael1947