Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 9 of 9
  1. #1

    Member Sales Rating: (0)

    Join Date
    Feb 2013
    Posts
    2

    Default RtiA9 woofer issues

    Hello,

    Recently purchased the 5.1 RtiA9's, CsiA6, FxiA6, PSW505 with a new Onkyo NR616 and my woofers on the RtiA9's fail my Audessey EQing. Tried biamping and the EQing comes back at 60Hz rather than the full range. Separated the highs and lows on the receiver and when it tests the woofers, it is a quiet and muffled sound and the EQing cannot get a reading and it errors out. Right now they are still separated on the receiver and some sound comes out but not working like it should. I have 100W going to the mids and highs, and another 100W going to the woofers and I feel that I should be getting more out of my speakers.

    Any help is appreciated.

    Thanks,
    Andrew

  2. #2

    Member Sales Rating: (13)

    Join Date
    Mar 2002
    Location
    The Mars Hotel
    Posts
    31,271

    Default

    That AVR, hell just about any AVR cannot drive the A9's properly. You need a separate amp.

    BTW, you are not bi-amping squat with an AVR. Look up what true bi-amping really is.
    'Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."

  3. #3

    Member Sales Rating: (0)

    Join Date
    Oct 2011
    Location
    Pocatello, Idaho
    Posts
    1,613

    Default

    You will really need more power to drive the A9's. If you try bi-amping like you are doing it only cuts the power to all of the channels, your amp is only 100 watts with two channels driven really drops off after you start adding more speakers
    Home Theater
    Onkyo PR-SC5508 Sharp LC-70LE847U
    Emotiva XPA-5 Emotiva XPA-2 Emotiva UPA-2
    Front RTi-A9 Wide RTi-A7 Center CSi-A6 Surround FXi-A6 Rear RTi-A3 Sub 2x PSW505
    Sony BDP-S790 Dishnetwork Hopper/Joey Logitech Harmony One Apple TV
    Two Channel
    Oppo 105D BAT VK-500 w/BatPack SDA SRS 2.3 Dreadnought Squeezebox Touch Apple TV

  4. #4

    Member Sales Rating: (0)

    Join Date
    Feb 2013
    Posts
    2

    Default

    Thanks for the input. Let me see what my budget can come up with...

  5. #5

    Member Sales Rating: (10)

    Join Date
    Jan 2003
    Location
    WA State
    Posts
    3,475

    Default

    tell us your budget and we'll spend it for you.

  6. #6

    Member Sales Rating: (1)

    Join Date
    May 2008
    Location
    Kotzebue, Yes that Kotzebue
    Posts
    373

    Default

    ACFunk,
    You didn't say, but have you just tried driving the A9's by themselves without any of the other speakers hooked up? If you are getting 'sound' that sounds 'right', at least you know that
    the 9's aren't buggered up.
    Don't be trying to 'bi' anything, just ensure the straps are in place on the 9's speaker terminals, plug in your speaker cables, top or bottom, not both and give it a listen.
    As suggested, that receiver, along with many others, aren't going to be comfortable pushing that entire set up comfortably. But, when you get it dialed in I think you will be surprised.
    Enjoy the journey,
    Nathan
    Home Rig

    SDA-1C Studios ('Pimped') I know they are only studios, but hey.
    Polk 1000p Center
    Pioneer Elite SC35 Receiver (Pre/Surround and Amplification duties!!!!)
    Sunfire Cinema Grand 5X200-Now in storage after repairs
    OPPO BDP-93
    Squeezebox
    Stepped up to name brand Speaker Cables and interconnects!
    Monitor 7's, 10's, SDA 1B's, 2B's, 2.3TL's, all in storage waiting for me.
    Sales Rating #1!!

  7. #7

    Member Sales Rating: (0)

    Join Date
    Aug 2012
    Location
    West TN
    Posts
    557

    Default

    ACFunk,
    I had very similar issues myself when I got started. Onkyo makes a great AVR but as stated above, however it will not drive your A9s to any good capacity. Unfortunately it is true that'll you'll need external amplification for your 9's. I personally spent a lot of money needlessly before I found the amplification solution. Now I have the 12s on an external parasound 2250 (which I highly recommend!!!) I will use my AVR to drive the surrounds and center speakers. Could you go on an amplify the surrounds and center, yes but it should really do fine without if you so choose. NICE setup by the way!!!! You'll enjoy it profoundly!!
    AVR - Onkyo NR809
    500gb HD for MP3 and FLAC files
    Amp - Parasound 2250 - FOR SALE BTW!! PM me if interested!
    Mains - Polk RTi12 towers
    Center - CSi5
    Surround - FXiA6's
    Sub - psw505
    Movies and games - PS3
    TV - Toshiba 52" HD

    Every vehicle has one good nuetral drop in it

  8. #8

    Member Sales Rating: (0)

    Join Date
    May 2012
    Posts
    412

    Default

    Everyone is right-on with their recommendations. I would first try to correctly configure the Audessey. Get an SPL meter and do it manually if you need to. I don't know why it's failing Audessey. With the speakers you have, I believe that AVR will only moderately (at best) drive them. Hate to say it but you need power! With the right amplification that set-up will sing.
    __________________________________________________ ___________________________________________
    Source: SONOS Music System, DAC: W4S DAC-2, Pre/Pro: Marantz AV8801, Amp: W4S MC5, Front: Polk RTIA9, Center: Polk CSIA6, Surrounds: Polk FXIA6, Sub EQ: DSPeaker Anti-Mode 8033C, Subs: 2 - Polk DSW PRO660WI, IC & Speaker Cables: Signal Cable

  9. #9

    Member Sales Rating: (0)

    Join Date
    Aug 2007
    Location
    Atlanta Metro Area
    Posts
    641

    Default

    Quote Originally Posted by ken brydson View Post
    tell us your budget and we'll spend it for you.
    Actually, we'll spend your budget ---plus 50% - minimum!!
    My DIY HT
    RT3000p fronts
    CS1000p center
    F/X1000 side surrounds
    RT3000p sats rear surrounds
    Polk RT35 height channel
    2 x SVS PB12/Plus 2's
    Onkyo PR-SC5507 Controller
    Sherbourne 7/2100 200 x 7 Amp
    Sherbourne TST4 100 x 2 Amp
    PS-3 BD
    HD-A35 HD DVD
    Oppo DV-980H for hirez audio
    Technics SL-D2 TT
    DVDO VP30 with SDI input
    HDFury for HDMI to RGBHV conversion
    NEC 10PG CRT projector
    Draper AT1200 acoustically transparent screen
    Berkline 090 electric recliners with Aura Bass Shakers

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Sub for RTiA9's
    By Sci-fi Polk Guy in forum Speakers
    Replies: 18
    Last Post: 04-25-2011, 08:18 AM
  2. Need Help rtia9
    By AeR0 in forum Speakers
    Replies: 12
    Last Post: 01-12-2010, 12:22 AM
  3. Replies: 6
    Last Post: 08-29-2009, 10:12 AM
  4. Need Help Rtia9
    By kidgoku in forum Basic Hookup/Wiring Questions
    Replies: 13
    Last Post: 12-30-2008, 04:05 PM
  5. rtiA9 or Lsi ?
    By poopsquaddle in forum 2 Channel Audio
    Replies: 33
    Last Post: 06-03-2008, 12:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts