Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 5 of 5
  1. #1

    Member Sales Rating: (0)

    Join Date
    May 2010
    Location
    Johnson City TN
    Posts
    1,593

    Default Sound out of both channels now...new rca's for a turntable

    I'd been working on an Technics SL-23 which are notorious for speed issues. That is usually a simple fix only requiring removal of the bottom cover and cleaning the speed pots. Got that working right and then I started losing the left channel. Looking closely at the cables, I noticed a crimp near where they go into the body of the TT.

    Figured I could splice the cable without too much difficulty but really wanted a better more permanent fix so I decided to go for my 1st rca cable swap. Sodering is still a new skill for me and I have been hesitant in the past due to the very delicate tonearm cables, but I am a cheap bast.. and didn't want to pay someone else to fix it, so it was time to learn with hands on experience.

    It took me forever to get the cable tensioner thing a ma jig (plastic clamp around the cable so it can't be moved in and out of the body of the turntable) to open. I'd never dealt with that type of fastener so I was about to throw in the towel before I really got started. I doubt it's reusable now, but it is off. Next I removed a metal plate that covers the cables and the pcb they are attached to. Finally had to remove a plastic riser which holds the cables in place and was ready to desolder the cables. While removing the plastic piece which had to be turned upside down to get to the screw- a couple of the tonearm wires pulled loose from their termination points. Great more issues. At that point I was doubting my abilities and felt pretty overwhelmed.

    Removing the existing wires was not too difficult. Apply heat with the solder iron, liquify the solder and pull the wires off the board. Did I mention that liquid solder is quite warm? Old cables removed now I had no choice but to go for it.

    Since I was not very optimistic for a good result I cut the ends off a pretty basic rat shack rca to make the first attempt. I've never made my own cables, so the shielding inside the shielding was new to me. Inside the inner shield I found maybe 3 strands of copper wire that were no bigger than a flea's pecker during a prostate exam. My need for bifocal glasses was becoming quite apparent unfortunately. I went ahead and tinned the wire together and then routed it thru the back of the turntable and inside the plastic riser holding the ground wire.

    Thankfully I was able to reassemble the plastic riser without disconnecting more of the tonearm wires. As I was trying to line up the tiny wires near the required spot on the small wafer board I was cussing the 3 armed munchkins with dainty fingers that also possesed perfect vision who obviously designed and installed these cables originally. So while holding the solder iron between my teeth, a roll of solder in my right hand and the rca cable with bi wire aspirations in my left hand (kidding about the teeth part but not far from the truth) I was able to connect the new rca's.

    I then carefully reassembled the parts removed previously and turned the whole piece back onto it's feet. Put the platter and belt back on. Reinstalled the cart and set it's tracking force and anti- skate adjustment back to 1.5 grams. Took a few deep breaths to prepare myself for dissapointment if all the effort was wasted. Now it was the moment of truth. I placed a record on the mat and dropped the needle down.

    Sound. Glorious sound. Both speakers were singing Billy Joel's "Easy Money". Success! I was astonished. It actually worked. For alot of guys out there that have been doing this for years and have some electronics experience you may be unimpressed, but for myself I was elated. If I can then anyone with some patience can as well. I'd read a few threads about swapping cables before and even watched a YouTube video, but it's really gratifying to follow thru fixing something yourself.

    I took a few pics, but I'm too tired to post them tonight.

  2. #2
     Moderator 
    Member Sales Rating: (0)

    Join Date
    Jul 2001
    Location
    Polk Audio
    Posts
    3,707

    Default

    Well done! One of the more tricky repair jobs done successfully! Photos are in order.

  3. #3

    Member Sales Rating: (0)

    Join Date
    May 2010
    Location
    Johnson City TN
    Posts
    1,593

    Default

    Here's a few pics....





    Click image for larger version

Name:	IMG_2489.jpg
Views:	23
Size:	500.3 KB
ID:	80829Click image for larger version

Name:	IMG_2490.jpg
Views:	22
Size:	415.3 KB
ID:	80830Click image for larger version

Name:	IMG_2496.jpg
Views:	21
Size:	357.8 KB
ID:	80831Click image for larger version

Name:	IMG_2502.jpg
Views:	21
Size:	374.8 KB
ID:	80832Click image for larger version

Name:	IMG_2506.jpg
Views:	22
Size:	282.2 KB
ID:	80833Click image for larger version

Name:	IMG_2507.jpg
Views:	22
Size:	313.3 KB
ID:	80834

  4. #4

    Member Sales Rating: (0)

    Join Date
    Dec 2009
    Location
    north georgia mountains
    Posts
    2,045

    Default

    Very nicely done, you have well and rightly lived up to the moniker hndyman.
    humpty dumpty was pushed

  5. #5

    Member Sales Rating: (12)

    Join Date
    Feb 2005
    Location
    Plainfield, Illinois
    Posts
    5,276

    Default

    Nice job! Good to see you used coax for the shielding properties. Another source of small coax is a good quality S Video cable you may have laying around. There will be two in there and usually are different colors. Some S Video cables just use small gauge wires with shield.
    Make yourself necessary to someone. Ralph Waldo Emerson

    Salk SoundScape 8's
    Krell KSL Class A Pre w/ KSL Phono
    Krell Class A KSA-250
    Harmonic Technology Pro 9+
    Squeezebox Touch / Welborne Labs PS / I2S Out Mod
    Denon 3910 w/I2S/DSD Out
    Twisted Pear Buffalo III Dual Mono ESS Sabre32 DAC
    Sennheiser HD650
    Heavy Plinth Lenco L75 Idler Drive
    AA MG-1 Linear Air Bearing Arm
    Dynavector 17D3
    Shunyata Hydra (Original)
    NHT B-12d subs
    GIK Acoustic Treatments


    CP Showcase

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. No Sound on HD satellite channels
    By scottylang81 in forum Troubleshooting
    Replies: 2
    Last Post: 10-05-2011, 08:26 AM
  2. Need Help SurroundBar 3000: Questions re volume and sound for HD channels
    By mdk in forum Troubleshooting
    Replies: 4
    Last Post: 12-28-2010, 07:21 PM
  3. Need Help POP Sound When Changing Channels
    By peeplwtchr in forum Troubleshooting
    Replies: 2
    Last Post: 12-01-2009, 03:20 PM
  4. tricks to help your turntable sound better
    By BigMac in forum The Clubhouse
    Replies: 2
    Last Post: 03-27-2009, 11:01 AM
  5. No sound front channels
    By donedroolin in forum Speakers
    Replies: 1
    Last Post: 06-03-2007, 12:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts