General Question

[oldrocker]

Attachment 82547

[oldrocker]

thats the best this old camera will do

[Mr. Bubbles]

Looks ok. Sorry for the alarm. Some of the gunk on the board was making it look funny at the other angle.

I missed what the actual symptom was.

definately check that polyswitch like Pittdog mentioned.

[oldrocker]

Will do TKS

[pitdogg2]

Guys did Polk ever use clear wires on the SRS? In looking closely at these pictures those wires look out of place and either it's the picture or there is some corrosion to my eyes in those wires?

Bubbles in looking closely at that area i was able to expand zoom in i see nothing that looks weird to me, looks like some paper may of been tore off but I do not see anything that would concern me.

[Mr. Bubbles]

My SRS's had the exact same wiring. I replaced it with similar wiring becasue it appeared to have some oxidation internaly on mine as well.

I didn't see anything in his latest pics either. I think it was some of the shiny residue that was making it passibly look like a couple of legs from some sort of component. At least that what my brain was thinking. All looks fine there though.

[pitdogg2]

My SRS's had the exact same wiring. I replaced it with similar wiring becasue it appeared to have some oxidation internaly on mine as well.

good to know at least I'm not totally NUTS

[Mr. Bubbles]

the oxidation on those wires in mine was the same as his. The oxidation was primarily on the ends that were soldered and no noticeable oxidation anywhere else. Crimped ends appeared ok.

[oldrocker]

will be replacing 2 tweeters

[Mr. Bubbles]

I may have some extra 2000's if you plan to use the same as original. Let me know.

[oldrocker]

if thats the route I go, will do. only 40 more posts go........ and maybe I can buy something here.

[oldrocker]

I like the idea of original however, lots of recommends that go both ways?

[oldrocker]

strictly 2 channel here, might broaden my horizons someday

[Smallies]

Never mind that get the high pass Sonicaps and Mills! Sonicraft.com