Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 8 of 8
  1. #1

    Member Sales Rating: (27)

    Join Date
    Mar 2003
    Location
    NC
    Posts
    20,970

    Default Interest Check... Vintage Crossover Plate Shelf for PTP crossovers.

    I at this time will not go into much detail but a local fabricator and myself have been working on a "shelf" that will mount to the factory aluminum crossover plate of the bigger SDA models.

    This will allow owners to fabricate a point to point crossover or whatever, mount the Gimpod boards on it, etc but allow enough room for the Clarity Cap MR caps if you decide to use them and keep them internal.

    I have no idea on price or anything.

    If you would have interest in such an animal say so here!

    Thanks

  2. #2

    Member Sales Rating: (5)

    Join Date
    Mar 2009
    Location
    Richardson, TX.
    Posts
    1,523

    Default

    Dunno... maybe. Been wondering what a ptp crossover wired with litz would sound like.
    Are you part of the dirty digital peasants or a member of the great Analog Master Race?

    SDA Recommended Playlist https://docs.google.com/spreadsheet/...FZCRkdxYXVNanc

    Open for editing.

  3. #3

    Member Sales Rating: (27)

    Join Date
    Mar 2003
    Location
    NC
    Posts
    20,970

    Default

    Talking with the guy... If we could get 9 more folks involved it would be $70.00 plus shipping/paypal...

    The shelf would bolt on to the factory plate and would be powder coated flat black

  4. #4

    Member Sales Rating: (1)

    Join Date
    Aug 2009
    Location
    central Illinois
    Posts
    3,551

    Default

    Quote Originally Posted by VR3 View Post
    The shelf would be powder coated flat black
    With cool red and orange flames

    just couldn't help myself
    carry on

  5. #5

    Member Sales Rating: (5)

    Join Date
    Mar 2009
    Location
    Richardson, TX.
    Posts
    1,523

    Default

    Pricing isn't bad. I'd have to figure out how to mount them in my 2.3s since I don't have a plate. Was looking at a set of 1.2 TLs a few months back, but I'm not sure my room would actually be big enough. The bass from my 2.3s with all the upgrades is already just shy of overwhelming the room, even with my rather modest 45 wpc monoblocks.
    Are you part of the dirty digital peasants or a member of the great Analog Master Race?

    SDA Recommended Playlist https://docs.google.com/spreadsheet/...FZCRkdxYXVNanc

    Open for editing.

  6. #6

    Member Sales Rating: (49)

    Join Date
    Jan 2009
    Location
    Wyred 4 Sound
    Posts
    11,212

    Default

    How far in would it go? I would be worried about it affecting air movement within the cabinet.
    No Way But The Hard Way, So Get Used To It!!!

  7. #7

    Member Sales Rating: (27)

    Join Date
    Mar 2003
    Location
    NC
    Posts
    20,970

    Default

    We have discussed putting randomly specific holes in the shelf plus other things - still in the design phase for sure
    www.Vr3Mods.com ///// www.Version3Audio.com

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro

  8. #8

    Member Sales Rating: (27)

    Join Date
    Mar 2003
    Location
    NC
    Posts
    20,970

    Default

    Here is a mock up of the shelf -

    In order to not restrict air flow I thought it made more sense to make a "vertical shelf" meaning all of the components would mount on to what would technically be "the side walls" and there will be a 3" deep floor (cabinet is 10.75" overall depth) that I can mount connectors, etc -

    Based off what I have here this should house a point to point crossover, be compatible with GIMPOD boards if you wanted to unmount the inductor, mount the stock inductor over this plate, reinstall the inductor with the GIMPOD board and remote mount the Clarity Cap MR caps if needed...

    Should be -awesome-

    I have purposely removed the dimensions from the drawing
    Attached Images  
    www.Vr3Mods.com ///// www.Version3Audio.com

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Check out the sliding shelf
    By Early B. in forum Electronics
    Replies: 12
    Last Post: 07-29-2008, 03:46 PM
  2. FS: Interest check B&K AV 125.7
    By polkatese in forum Flea Market
    Replies: 32
    Last Post: 10-31-2005, 04:14 PM
  3. Replies: 28
    Last Post: 06-01-2005, 11:40 AM
  4. Interest check
    By Maurice in forum Flea Market
    Replies: 0
    Last Post: 03-16-2005, 04:50 PM
  5. Interest Check: ONE Lsi-7
    By timothyj in forum Flea Market
    Replies: 3
    Last Post: 08-14-2004, 03:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts