I've been trying to troubleshoot this one on my own but I'm stumped. One of my RT800i is louder than the other. The drivers seem to be working. There is no rubbing or scratching when I push in the woofers. The tweeter is producing sound. Up close, the speaker seem to be putting out the same amount of sound as the other one but when in the listening position, one side dominates the other. I have swapped speakers and the change in output stays with the speaker which would indicate that it isn't my AVR.
I have removed the drivers and crossovers and visually inspected them but have found no sign of damage. Could there be anything wrong with any of the components that just isn't visible? I am the second owner of these speakers. Could the previous owner have changed out a driver and possibly wired them back the wrong way. This was actually the case with my RT16's where the previous owner swapped out a blown driver and wired it out of phase(only took me a few minutes to figure that one out). But everything looks fine in these.