Buy Direct M-F 9am - 10:30pm EST 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 5 of 5
  1. #1

    Member Sales Rating: (0)

    Join Date
    Dec 2003
    Posts
    3

    Default AMR-130 No sound

    I have had My set of AMR-130 since last Christmas, they have work great, all of a sudden I have in intermittent sound, I do have sound from the head phone jack of my sound card, unfortunately mostly they do not work, I can get them to work if I complexly power them down for about a hour, they will then work for a short time, I then have to use my headphones.

  2. #2

    Member Sales Rating: (40)

    Join Date
    Jul 2001
    Location
    North Texas
    Posts
    18,399

    Default

    Are the AMR130's powered? Try them in the headphone jack, see if you get anything.

    Cheers,
    Russ
    Check your lips at the door woman. Shake your hips like battleships. Yeah, all the white girls trip when I sing at Sunday service.

  3. #3

    Member Sales Rating: (0)

    Join Date
    Dec 2003
    Posts
    3

    Default

    Yes they are powered on, like said in my post, I can get them to work by powering them down for an hour then powering them back on, the head phone jack of my sound card works fine. Do the AMR-130s have a Head phone jack I cannot find? The green lights are on both the sub and the satellite speaker, I suspect that the SUB is a little hosed Does Polk sell a replacement?

  4. #4

    Member Sales Rating: (40)

    Join Date
    Jul 2001
    Location
    North Texas
    Posts
    18,399

    Default

    I was asking if the AMR 130's were powered, ie, do they plug into the wall - I get the jist now anyway.

    Have you plugged the AMR into your headphone jack on your sound card? Does your soundcard have other jacks? Line out, etc? Try plugging it into a different jack.

    Cheers,
    Russ
    Check your lips at the door woman. Shake your hips like battleships. Yeah, all the white girls trip when I sing at Sunday service.

  5. #5

    Member Sales Rating: (0)

    Join Date
    Dec 2003
    Posts
    3

    Default

    AMR-130s are a 5.1 speaker so all of the jacks on my card are populated, I hooked the satellites up my stereo and they work fine, all of the speaker connect to the Sub, via rugular speaker cable, ther is one satellites that is power control that does not, I cannot see a way to hook the SUb or the main satellites up to anything else.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts