Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 5 of 5
  1. #1

    Member Sales Rating: (0)

    Join Date
    May 2013
    Posts
    2

    Default Question about PA660.4

    I acquired this amp from a buddy so I don't have the manual but he was telling me I can run all four of my door speakers and also still run two subs off the bridged channels, making a total of six speaker running in "tri-mode". From what I have found online this sounds true but my question now is since the subs I have are two Kicker C12a 8 Ohm. Yeah I know there old but they have never been used lol. Anyways, if I hook all my door speakers up to their normal channels and run the two 8 Ohm subs parallel for a 4 Ohm load off of one bridge, will this be any problem? What would the RMS be running this way? Thanks

    EDIT: These subs are rated 200RMS I believe.
    Last edited by blakmetalemp; 05-04-2013 at 07:32 PM.

  2. #2

    Member Sales Rating: (0)

    Join Date
    Feb 2013
    Location
    Walled Lake,Mi
    Posts
    34

  3. #3

    Member Sales Rating: (0)

    Join Date
    Feb 2013
    Location
    Walled Lake,Mi
    Posts
    34

    Default

    you could do that I would not recommend, you'll have to wire your speakers down to 2 ohms per channel . chan a then wire the subs up to the b chan. make sure your head unit has 2 or 3 sets of preouts, I would look for the matching amp for the kicks i think it was pa230 or something like that and use your

  4. #4

    Member Sales Rating: (0)

    Join Date
    Feb 2013
    Location
    Walled Lake,Mi
    Posts
    34

    Default

    pa880 for the amp for your subs

  5. #5

    Member Sales Rating: (0)

    Join Date
    May 2013
    Posts
    2

    Default

    thanks for the input. I think I'll just wire the 660 amp I have for two channel @ 150 rms bridged at two channels and leave the stock head to push the door speakers, which do sound good, I just want to add some bottom end. not looking to build a thumper. I will however be tapping into the rear speakers with a LOC.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. PA660 mounting
    By Scott02 in forum Car Audio & Electronics
    Replies: 1
    Last Post: 04-28-2012, 11:49 AM
  2. PA660 mounting
    By Scott02 in forum Basic Hookup/Wiring Questions
    Replies: 0
    Last Post: 04-28-2012, 09:51 AM
  3. PA660 dropping out
    By joeyv in forum Troubleshooting
    Replies: 0
    Last Post: 10-03-2011, 10:02 PM
  4. Need Help Connecting to PA660
    By chuyrod in forum Troubleshooting
    Replies: 0
    Last Post: 05-24-2011, 11:20 AM
  5. Factory HU - PA660, PA880, DXI's.
    By Arvtechman in forum Car Audio & Electronics
    Replies: 0
    Last Post: 02-19-2011, 04:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts