OK, got my picture to load.
I should be able to find more time to play around with them this week. I will look for more suitable stands but when I looked online a few weeks ago I didn't find anything tall enough that looked stable for the width of the CRS. May call Polk and see what the new tweeters will cost tomorrow.
Can I delete a post or just edit it?
Yeah, finding stands for them is challenging. Noel at Skylan should be able to help you out, http://www.skylanstands.com/
Tell Polk you are a Club member to receive the discounted price of $48.00 each.
You can only edit and only within 20 minutes of posting.
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
If you are going to replace the tweeters, do it right the first time - get the RD0198 (not 94) tweeters and update your crossovers with the TL mod (search on here for the instructions). The results will be worth it. I have a set of CRS+ with the TL mod and they blow me away every day.
Home Theater/2 Channel:
Front: SDA-2ATL http://www.polkaudio.com/forums/show...ished...Almost
Center: Custom http://www.polkaudio.com/forums/show...hannel-Project
Surrounds & Rears: Custom http://www.polkaudio.com/forums/show...rround-Project
Sonicaps, Mills, RDO-194s-198s, Dynamat, H-Nuts, BH5
Pioneer Elite VSX-72TXV, Carver PM-350, SVS PB2-Plus Subwoofer
Once you move the speakers forward and ensure the interconnect is good, change the polarity of one speaker cable.
You'll know right away if that was the problem. I'm also thinking, it's a polarity issue.
Do those have the double tweeters or single?
...and nice Marantz.
Monitor 4, 5, 7c, 10a, 10a, 10b
SDA 2b, CRS
There are currently 1 users browsing this thread. (0 members and 1 guests)