Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 7 of 7
  1. #1

    Member Sales Rating: (0)

    Join Date
    Jun 2007
    Location
    Laker City (LA), CA
    Posts
    1,071

    Default New Wheels - New install

    god this place is dead :(

    So here we go. New wheels - 2013 Prius two.
    I am driving about 20k miles a year right now and the subaru was killing me on gas. 15mpg 91 octane. No ty.
    So I got a Prius at wholesale cost and 0% financing. Saving 250 dollars a month on gas and the payment only went up 100 bucks. While I am not IN LOVE with my car, it is extremely practical for how much i drive.

    Anyways, I have my sr5250s and sr 12 laying around with an MS8, kenwood xr1 and xr4. I am going to keep the radio stock because it has some functionality that I dont want to lose. I am strongly considering selling the 5250s and getting something else - i just dont know what i want.
    I am def selling the sr12 because i dont want to have the box back there. So i am prob going to grab a SI MKIV when it comes out.

    any suggestion on some reasonably priced comps that will be better than the 5250s - I think i liked my carbon momo 6.5's better.
    2013 Toyota Prius
    Audible Physics 3 Way: H6MB, AR3-A, AR2.0
    Image Dynamics iDMax 12" D2v4
    (2) Alpine PDX-V9 Bridged, Alpine PDX-M12 (500w Mid-Bass, 200w Mid, 200w Tweet, 1200w Sub)
    Mosconi 6to8 v8

  2. #2

    Member Sales Rating: (0)

    Join Date
    Jun 2007
    Location
    Laker City (LA), CA
    Posts
    1,071
    2013 Toyota Prius
    Audible Physics 3 Way: H6MB, AR3-A, AR2.0
    Image Dynamics iDMax 12" D2v4
    (2) Alpine PDX-V9 Bridged, Alpine PDX-M12 (500w Mid-Bass, 200w Mid, 200w Tweet, 1200w Sub)
    Mosconi 6to8 v8

  3. #3

    Member Sales Rating: (0)

    Join Date
    Dec 2003
    Location
    Chattanooga, TN
    Posts
    11,825

    Default

    There are no "reasonably priced" components that sound better than the SR5250's. They are some of the best speakers ever made. Not just saying that because I'm on a Polk forum.

    There are better than it you're gonna have to pay for it and I'm talking like $1000. Those mids are the thing. The tweeters are the same as the $25 Vifa XT25 that you can get on Madisound but that mid is simply superb. When you look at the Klippel measurements on sites like DIYMA and then look at the SR's, they're better than the vast majority out there and only bested by a few.

    So maybe upgrade the tweeter to a soft dome like the Scan Illuminators or something different like the LPG aluminum dome tweeters, go active and really bring out the best in those mids.

  4. #4

    Member Sales Rating: (0)

    Join Date
    Aug 2012
    Location
    NW Indiana
    Posts
    1,003

    Default

    Quote Originally Posted by eloplayspolo View Post
    - I think I liked my carbon momo 6.5's better.
    What do you like about the Momo's over the SR's? What are you looking for that is missing with the SR's?

    Quote Originally Posted by MacLeod View Post
    So maybe upgrade the tweeter to a soft dome like the Scan Illuminators .....
    Now you're talking....Scan Illum tweets, Rev Woofers running active....but priced on the high side...$220 Tweeters, $440 woofers. The Scan will have a different character and the mids can go pretty low if the door install is up to par.

    But, we know to know what eloplayspolo is after.
    FAMILY ROOM
    TV - Mitsubishi WD-73734 73" DLP 1080P | AVR - Onkyo TX-NR3008 | Source - Sony PS3 Slim 320GB | Front - PolkAudio RT3000p | Center -PolkAudio CS400i | Surround - PolkAudio F/X1000 | Sub - DIY Stereo Integrity HT 15 | Sub Amp - Behringer EUROPOWER EP2500

    2 Ch Dreaming...hoping to purchase, build someday???
    OPPO 105 | Cary or Rogue Audio tube Preamp | Parasound HALO A21 amp | DIY Mini Statements towers

  5. #5

    Member Sales Rating: (0)

    Join Date
    Dec 2003
    Location
    Chattanooga, TN
    Posts
    11,825

    Default

    While there may be speakers you like better than the SR's out of the box, you're still not going to find much better when looking at the raw drivers. The 5250's have a Qts of .70 which PERFECT. That is the ideal you would build a box to achieve but the 5250's have this sitting in your door panel (6.5's are .65). They play up to 5K the effort they start rolling off bad even off axis.

    I'd strongly suggest keeping at least the mids, getting some different tweets, go active and start tuning. You can make SR speakers sound a LOT better by actively tuning them than by running them stock. Stock, the crossover point is too low. It's fine when on a sound board but not fine when the mids are in*the doors off axis while the tweeters are 3' higher and more on axis.

    Trust me dude. I may very well be the world foremost expert on tuning the Polk SR's in a car. I've been using the 6's mainly these last 8 years competing but I did run the 5's in 07 in my Accord. And again in 11 in my Edge. They're not the best for midbass but for everything above 80 Hz, you're not going to find much better for a car. *

  6. #6

    Member Sales Rating: (0)

    Join Date
    Oct 2004
    Location
    North Texas
    Posts
    6,078

    Default

    I'd expect the midbass to be what he misses from the MOMO's. In that case, you aren't going to get that with the SR. The MOMO's were the most fun I had in a car with speakers, but they don't compare in sheer SQ to the SR's. I don't know if the SR is the way to go if you just want it to have punch and not worry about a detailed sound.

    The SR's have cost me thousands now in home gear, and I've reached a point where if I were to do another install, it wouldn't be a sheer SQ build where I'd have to be super critical about soundstage and imaging and all that nonsense. I'd want something that just sounded good and were fun to listen to: the MOMO's always did that, no matter what the music was. The SR's? Yeah, they sound good, but they can be very unforgiving for many recordings. To put it bluntly, I'd want a system that would play the crap out of those albums that my main rig eats up and spits out in disgust.
    Usher CP-6311, Shuguang S200MK, Shuguang S845MK, Pioneer BDP-51fd, Essence Audio HDACC, Douglas IC's, Douglas Alpha bi-wire SC's, Pangea/Douglas PC's, Epson 8100

  7. #7

    Member Sales Rating: (0)

    Join Date
    Jun 2007
    Location
    Laker City (LA), CA
    Posts
    1,071

    Default

    I miss the punch from the Momos midbass. The SRs clarity is insane, but only with good recordings, like what Cody said.

    I ran the SRs active with the MS8 in my last build, and the doors were sealed and dampened EXTREMELY well.

    As far as tuning goes - Honestly, i felt like the MS8 gave nearly no flexibility, i was concerned that i didnt have the skills to do a full manual tune with a bit one or the mosconi unit.

    Any of you guys ever get over installing? I know you do Mac, you complain the whole way :)
    Maybe i need to do this one slowly i wonder what Bing charges for an install...

    What recommendations do you have for the midbass install in the door?
    2013 Toyota Prius
    Audible Physics 3 Way: H6MB, AR3-A, AR2.0
    Image Dynamics iDMax 12" D2v4
    (2) Alpine PDX-V9 Bridged, Alpine PDX-M12 (500w Mid-Bass, 200w Mid, 200w Tweet, 1200w Sub)
    Mosconi 6to8 v8

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. New Wheels...HRE 3-Piece
    By dorokusai in forum The Clubhouse
    Replies: 24
    Last Post: 02-10-2012, 07:11 PM
  2. News hot wheels and kreskin
    By scottyboy76 in forum The Clubhouse
    Replies: 8
    Last Post: 10-07-2011, 09:48 PM
  3. Karma Some hot wheels/etc
    By kawizx9r in forum The Clubhouse
    Replies: 52
    Last Post: 09-26-2010, 04:04 PM
  4. sounds on wheels
    By danger boy in forum The Clubhouse
    Replies: 2
    Last Post: 02-03-2008, 07:54 AM
  5. monitor 10's with wheels?
    By danger boy in forum Flea Market
    Replies: 9
    Last Post: 02-22-2005, 11:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts