Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 30 of 34
  1. #1

    Member Sales Rating: (12)

    Join Date
    Nov 2008
    Location
    http://audiomilitia.proboards.com
    Posts
    12,406

    Default My PFB moment...

    Well guys, I finally had a PFB moment I will not soon forget. We have been struggling with cell reception here at the house for some time, so I finally got a signal enhancer from our service provider and set about plugging it into our network. I set everything up and it worked well.

    The device was placed on top of our fireplace mantle as it needs to be up high to function correctly. While we were asleep, the cat and dog decide to chase one another around the house, and one of them gets tangled up in one of the cords, pulling the device off the mantle.... and onto one of my amps!

    I lost a couple tubes, which were easy to replace, but the transformer cover will need to be repainted by a local body shop. I will lose the inscription Bob signed on the back, but thank god I built them as strong as I did or the damage would have been much worse. It does not show in the picture very well, but there are two small dents in the cover, otherwise I would just buff this out, because the damage never got through the clear coat....
    Attached Images  
    HT Setup... Pioneer Elite SC-37, Polk Audio SDA-SRS 1.2TL's , Oppo BDP 93
    Two Channel... Carver Statement 450~1 Vacuum Tube Monoblocks, Dodd Mid-line Tube Linestage with Psvane 12Ax7 tubes, Pioneer Pdd 9Mk II SACD Player, Yamaha PX-3 Turntable with Sumiko BPS EvoIII, Polk Audio SDA-SRS 1.2TLs.


    "Everything we have fought for has been lost, and everything we fought against, we have become...."

  2. #2

    Member Sales Rating: (13)

    Join Date
    Mar 2002
    Location
    The Mars Hotel
    Posts
    30,464

    Default

    Ouch!
    'Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."

  3. #3

    Member Sales Rating: (0)

    Join Date
    Jan 2011
    Location
    Nebraska
    Posts
    1,615

    Default

    I would probably just clean them up as best as you could and keep the Carver inscription rather than loose it in the repainting.
    AVR: Onkyo Tx-NR808
    Amplifier: Carver A-753x 250 watts x 3
    Fronts: Polk RTI A7 (modded by Trey VR3)
    Center: CSI A4 (modded by Trey VR3)
    Rear: FXI A4
    Sub: Polk DSW Pro 660wi
    TV: LG Infinia 50PX950 3D
    Speaker Cable: AudioQuest Type 8
    IC: AudioQuest Black Mamba II

  4. #4

    Member Sales Rating: (16)

    Join Date
    Jul 2007
    Location
    Andromeda
    Posts
    14,230

    Default

    Did you know that pfb is a really bad speller?

    http://www.youtube.com/watch?v=8__o9G1ieJI

  5. #5

    Member Sales Rating: (4)

    Join Date
    Jan 2008
    Location
    Salem, Oregon (Polk county!)
    Posts
    4,122

    Default

    Sorry about the accident John.
    Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:

    "I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion."

    "Green leaves reveal the heart spoken Khatru"- Jon Anderson

    "Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee

  6. #6

    Member Sales Rating: (1)

    Join Date
    Jul 2001
    Location
    chicago
    Posts
    16,100

    Default

    Sorry to hear that John.

    See, Emo Kitty strikes again. Dogs are good judges of character, and yours just happened to see right threw that Emo kitty pretending to be a regular house cat.

  7. #7

    Member Sales Rating: (0)

    Join Date
    Mar 2012
    Location
    MAINE
    Posts
    2,695

    Default

    Hopefully a easy repair. Things just happen. Even when trying to avoid
    RANDY
    ~SDA2b Adcom gfa555 565pre 555t 600cd Pioneer PLa35d
    ~SDA1c Denon POA2200 Yamaha RX-V1(gold) HK25 AT-LP120tt-HT 4/rs Cs400i/cc Premier Acoustic PA-150 subwoofer
    ~Marantz 2252b 5025b 6300tt Tech-a4010s monitor 7b
    ~Yamaha cr2040 Advent2 Monitor 10a
    ~Rotel RV555 monitor 4 series 2 -office-
    ~Pioneer seQ404 headphones

  8. #8

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Location
    Bucks County PA
    Posts
    300

    Default

    I hear that cat skin transformer covers are the next big thing! Just a thought!
    Source: Technics SL1200MKII Denon DL-110 cartridge
    Preamp: Hagerman Bugle Phono stage
    Amplifier: 4 x 5670 4 x EL34 integrated VAL VP110S (modified w/ vitamin Q caps, Alps blue velvet volume control, Vishay mil spec. metal film resistors..............)
    Speakers: Polk SDA 1A Signature

  9. #9

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Location
    NW Indianapolis Indiana
    Posts
    9,153

    Default

    John, here's the important question...

    You had both a cat and a dog when this happened. Do you still have a cat and a dog, or is one of them MIA all of a sudden
    Advice is free, the Flea Market is earned - F1Nut

    Main HT: APC H15 | Pio 51FD | Uverse DVR | Xbox 360 | Squeezebox Classic | Integra DTR 5.9 | Carver AV-705x & M1.0t MKII Opt002 | LSi 15 | LSiC | LSi F/x | Kimber Hero IC & 8VS SC

    Office Rig: Win 7 -> DacMagic w/ Pangea PSU | Pro-ject Debut III | Sunfire TGP-II | Parasound HCA-750ii | Polk RTA 11TL | Cables TBA

    Bedroom: Uverse DVR | Roku 2 | Samsung LCD | SurroundBar 2000

    Sales Rating
    Gear

  10. #10

    Member Sales Rating: (0)

    Join Date
    Dec 2012
    Location
    Cleveland, Ohio
    Posts
    326

    Default

    Anyway a brick fireplace mantle is a poor place for a signal booster. High frequency radio waves struggle to get through thick brick walls.

  11. #11

    Member Sales Rating: (0)

    Join Date
    Dec 2010
    Location
    Central NC
    Posts
    2,421

    Default

    Quote Originally Posted by jbooker82 View Post
    I would probably just clean them up as best as you could and keep the Carver inscription rather than loose it in the repainting.
    ^^^ Seconded - with the clear coat intact a little dent or two + Bob's sig gives it character.
    "Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills, polyswitches removed, Lg Solen inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR binding posts, upgraded IC Cable, Black Hole Damping Sheets (3" strips) installed on back wall behind MW's & Tweeters, interior of cabinets sealed, AI-1 interface with 1000VA transformer

  12. #12

    Member Sales Rating: (1)

    Join Date
    Jul 2001
    Location
    chicago
    Posts
    16,100

    Default

    I don't know guys, John and Bob Carver hook up every Sunday to take in an afternoon show, share a bucket of popcorn. It would be easy for him to get another sig.

  13. #13

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Location
    Bucks County PA
    Posts
    300

    Default

    All kidding aside. I think that a professional auto detailer could fill the nicks with paint (hopefully you have some left over from the build) and buff it out so that the scratches would be tough to see without close up inspection. They use a single hair brush to fill small scratches. They build it up a little at a time until they have enough material to match the thickness of the original paint. Then they wet sand with 1000 grit followed by a buffing process. The dent may be popped out to some extent as well using paintless dent removal methods. I had this detail work done to my truck, and the results were fantastic! Door dings were gone, and many of the nicks, scratches, and chips were not detectable.
    Source: Technics SL1200MKII Denon DL-110 cartridge
    Preamp: Hagerman Bugle Phono stage
    Amplifier: 4 x 5670 4 x EL34 integrated VAL VP110S (modified w/ vitamin Q caps, Alps blue velvet volume control, Vishay mil spec. metal film resistors..............)
    Speakers: Polk SDA 1A Signature

  14. #14

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Location
    Urbandale IA
    Posts
    2,211

    Default

    Quote Originally Posted by newbie308 View Post
    All kidding aside. I think that a professional auto detailer could fill the nicks with paint (hopefully you have some left over from the build) and buff it out so that the scratches would be tough to see without close up inspection. They use a single hair brush to fill small scratches. They build it up a little at a time until they have enough material to match the thickness of the original paint. Then they wet sand with 1000 grit followed by a buffing process. The dent may be popped out to some extent as well using paintless dent removal methods. I had this detail work done to my truck, and the results were fantastic! Door dings were gone, and many of the nicks, scratches, and chips were not detectable.
    +1 If not this they may be able to do a partial paint, and either burn in the clear at one of the curves or just clear over the sig. I'll think you should be able to save the sig one way or another...

  15. #15

    Member Sales Rating: (1)

    Join Date
    Jul 2001
    Location
    chicago
    Posts
    16,100

    Default

    Maybe it's an opportunity to customize even more. How about a nice piece of cherry wood on the top with the word "Carver" burnt into the wood.

  16. #16

    Member Sales Rating: (12)

    Join Date
    Nov 2008
    Location
    http://audiomilitia.proboards.com
    Posts
    12,406

    Default

    Quote Originally Posted by tonyb View Post
    Maybe it's an opportunity to customize even more. How about a nice piece of cherry wood on the top with the word "Carver" burnt into the wood.
    Ummmm... No, but thanks for the suggestion.

    Two estimates so far put the price at 400.00 to repaint. At this time , not really an option. Paintless dent removal is also out due to the thickness of the material. I am thinking about using a two tone approach that would use a contrast color on the tops of both covers. This was I don't have to rework the whole thing, but any descision made will be a ways off and done with extreme caution.
    HT Setup... Pioneer Elite SC-37, Polk Audio SDA-SRS 1.2TL's , Oppo BDP 93
    Two Channel... Carver Statement 450~1 Vacuum Tube Monoblocks, Dodd Mid-line Tube Linestage with Psvane 12Ax7 tubes, Pioneer Pdd 9Mk II SACD Player, Yamaha PX-3 Turntable with Sumiko BPS EvoIII, Polk Audio SDA-SRS 1.2TLs.


    "Everything we have fought for has been lost, and everything we fought against, we have become...."

  17. #17

    Member Sales Rating: (1)

    Join Date
    Jul 2001
    Location
    chicago
    Posts
    16,100

    Default

    Ok, big guy....another idea. Have someone airbrush your favorite album cover on the top. Now that might look cool.
    legacy Focus 20/20
    Butler tdb 2250
    Pioneer 59AVI
    Pioneer BDP 320
    50 in. Pioneer Kuro pdp 5010
    FX 500 surround
    Reality cables
    Pioneer elite vsx21
    Sonos-Cullen mod.
    Audio Metallurgy GA-0 digital
    PS Audio Quintet
    Cary Xciter dac

  18. #18

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Location
    NW Indianapolis Indiana
    Posts
    9,153

    Default

    Quote Originally Posted by tonyb View Post
    Ok, big guy....another idea. Have someone airbrush your favorite album cover on the top. Now that might look cool.
    How about a portrait of Bob Carver instead .... that would make it even better....

    Besides the album cover for "Whenever You Need Somebody" by Rick Astley wouldn't look good, nor would "Playing with Fire" by Kevin Federline
    Advice is free, the Flea Market is earned - F1Nut

    Main HT: APC H15 | Pio 51FD | Uverse DVR | Xbox 360 | Squeezebox Classic | Integra DTR 5.9 | Carver AV-705x & M1.0t MKII Opt002 | LSi 15 | LSiC | LSi F/x | Kimber Hero IC & 8VS SC

    Office Rig: Win 7 -> DacMagic w/ Pangea PSU | Pro-ject Debut III | Sunfire TGP-II | Parasound HCA-750ii | Polk RTA 11TL | Cables TBA

    Bedroom: Uverse DVR | Roku 2 | Samsung LCD | SurroundBar 2000

    Sales Rating
    Gear

  19. #19

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Location
    Bucks County PA
    Posts
    300

    Default

    Quote Originally Posted by nooshinjohn View Post
    Ummmm... No, but thanks for the suggestion.

    Two estimates so far put the price at 400.00 to repaint. At this time , not really an option. Paintless dent removal is also out due to the thickness of the material. I am thinking about using a two tone approach that would use a contrast color on the tops of both covers. This was I don't have to rework the whole thing, but any descision made will be a ways off and done with extreme caution.
    $400 for a repaint is just crazy! I had my whole truck detailed as described for just under $200 and that included steam cleaning the interior! This should be less than $100 (IMHO) based on my experience with detailers. Prices like $400 are "We aren't interested" numbers! Keep looking, and you will find someone who needs and wants the work.
    Source: Technics SL1200MKII Denon DL-110 cartridge
    Preamp: Hagerman Bugle Phono stage
    Amplifier: 4 x 5670 4 x EL34 integrated VAL VP110S (modified w/ vitamin Q caps, Alps blue velvet volume control, Vishay mil spec. metal film resistors..............)
    Speakers: Polk SDA 1A Signature

  20. #20

    Member Sales Rating: (12)

    Join Date
    Nov 2008
    Location
    http://audiomilitia.proboards.com
    Posts
    12,406

    Default

    The cover is in the shop now.... after careful consideration, I have decided to restore it, and if it needs to be sent to Bob for a new signature, so be it. I have way too much blood, sweat and tears in these amps to NOT get it fixed. The shop that does the work for my dealership is going to do it for the princely sum of pay the painter a hundred bucks and a 12 pack of Corona and all is good.

    I compare this to finally getting your dream muscle-car fully restored and some kid dings the door with his bicycle or something. On the surface, you would try and be cool, but inside every time you look at that spot, it would drive you nuts. I get it back in a week.
    HT Setup... Pioneer Elite SC-37, Polk Audio SDA-SRS 1.2TL's , Oppo BDP 93
    Two Channel... Carver Statement 450~1 Vacuum Tube Monoblocks, Dodd Mid-line Tube Linestage with Psvane 12Ax7 tubes, Pioneer Pdd 9Mk II SACD Player, Yamaha PX-3 Turntable with Sumiko BPS EvoIII, Polk Audio SDA-SRS 1.2TLs.


    "Everything we have fought for has been lost, and everything we fought against, we have become...."

  21. #21

    Member Sales Rating: (26)

    Join Date
    Oct 2006
    Location
    The tube lair in Charlotte, NC
    Posts
    11,307

    Default

    Shoot, I would have just put a potted plant on it to cover it up.

    Tom
    In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

    The best way to enjoy digital music reproduction is to never listen to good analogue reproduction.

  22. #22

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Location
    Bucks County PA
    Posts
    300

    Default

    Quote Originally Posted by nooshinjohn View Post
    The cover is in the shop now.... after careful consideration, I have decided to restore it, and if it needs to be sent to Bob for a new signature, so be it. I have way too much blood, sweat and tears in these amps to NOT get it fixed. The shop that does the work for my dealership is going to do it for the princely sum of pay the painter a hundred bucks and a 12 pack of Corona and all is good.

    I compare this to finally getting your dream muscle-car fully restored and some kid dings the door with his bicycle or something. On the surface, you would try and be cool, but inside every time you look at that spot, it would drive you nuts. I get it back in a week.
    That is awesome! Definitely the right decision. I'd hate to see you settle, knowing that it was not right.

    You should send the other cover, too! This way the painter can compare his results to the original. The paint appears to be a metallic finish, and as such, it matters how it is applied for the metallic flakes to reflect in the same direction. If it is not applied the same, it may appear lighter or darker as compared to the original paint job. Good luck!
    Source: Technics SL1200MKII Denon DL-110 cartridge
    Preamp: Hagerman Bugle Phono stage
    Amplifier: 4 x 5670 4 x EL34 integrated VAL VP110S (modified w/ vitamin Q caps, Alps blue velvet volume control, Vishay mil spec. metal film resistors..............)
    Speakers: Polk SDA 1A Signature

  23. #23

    Member Sales Rating: (12)

    Join Date
    Nov 2008
    Location
    http://audiomilitia.proboards.com
    Posts
    12,406

    Default

    Great news... I made the right call in getting the cover fixed. The shop expertly matched the color so that even I cannot tell what was original and what was not. They were able to use the curves on the front and back to feather the new paint into the original color, as well as perfectly match the mica content of the paint and the way it lays down so light refraction is an exact match.

    The best part is the original signature and pinstripe are untouched!

    Will post a pick or two before I put the cover back on.
    HT Setup... Pioneer Elite SC-37, Polk Audio SDA-SRS 1.2TL's , Oppo BDP 93
    Two Channel... Carver Statement 450~1 Vacuum Tube Monoblocks, Dodd Mid-line Tube Linestage with Psvane 12Ax7 tubes, Pioneer Pdd 9Mk II SACD Player, Yamaha PX-3 Turntable with Sumiko BPS EvoIII, Polk Audio SDA-SRS 1.2TLs.


    "Everything we have fought for has been lost, and everything we fought against, we have become...."

  24. #24

    Member Sales Rating: (0)

    Join Date
    Aug 2013
    Location
    Abbotsford BC
    Posts
    1,463

    Default

    Ah good, you found a shop that wanted the work and also cared enough to retain the important touches, so hard nowadays...I am a licensed mechanic...and take great pride in my work regardless of if the job is a simple oil change or say a subframe replacement, pride is where it counts.
    Living Room Evolved
    Onkyo TX-NR717
    Parasound HCA-1200II > Polk Audio RTi A7 Black Front
    Polk Audio RTi A3 Black Rear
    Polk Audio CSiA6 Center
    Tannoy TS2.12 Sub
    Marantz CD6004
    Apple Mac Mini
    Apple TV 3rd Gen
    Sony PS3 160Gb/Microsoft XBox 360
    Insignia 55 inch 120Hz TV

    Bedroom
    Harman Kardon HK 3490/HK 3375
    A:Onkyo SKF-4800 Towers Black
    B:Polk Monitor (Model) 5 with Peerless Tweets
    Polk PSW108
    PS3 320Gb
    Insignia 39 inch 60Hz TV

  25. #25

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Location
    Bucks County PA
    Posts
    300

    Default

    That is great! Now you need a way to keep it from happening again! Cat repellent?
    Source: Technics SL1200MKII Denon DL-110 cartridge
    Preamp: Hagerman Bugle Phono stage
    Amplifier: 4 x 5670 4 x EL34 integrated VAL VP110S (modified w/ vitamin Q caps, Alps blue velvet volume control, Vishay mil spec. metal film resistors..............)
    Speakers: Polk SDA 1A Signature

  26. #26

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Location
    NW Indianapolis Indiana
    Posts
    9,153

    Default

    Quote Originally Posted by newbie308 View Post
    That is great! Now you need a way to keep it from happening again! Cat repellent?
    No cat.... or no dog.... whichever you love more
    Advice is free, the Flea Market is earned - F1Nut

    Main HT: APC H15 | Pio 51FD | Uverse DVR | Xbox 360 | Squeezebox Classic | Integra DTR 5.9 | Carver AV-705x & M1.0t MKII Opt002 | LSi 15 | LSiC | LSi F/x | Kimber Hero IC & 8VS SC

    Office Rig: Win 7 -> DacMagic w/ Pangea PSU | Pro-ject Debut III | Sunfire TGP-II | Parasound HCA-750ii | Polk RTA 11TL | Cables TBA

    Bedroom: Uverse DVR | Roku 2 | Samsung LCD | SurroundBar 2000

    Sales Rating
    Gear

  27. #27

    Member Sales Rating: (1)

    Join Date
    Oct 2008
    Location
    Descending toward the moon in the CLEM (Chinese Lunar Excursion Module), looking for Chang'e
    Posts
    11,470

    Default

    No pets here, boys! No worries, no duties, no walking anything, no feeding, no cleaning up after, no accidents. PRICELESS!

    I must have gotten up on the wrong side of the bed today because every post I've made is that of a crotchety old man?

    cnh
    Onkyo TX-SR 805 System #1 HT AVR
    Office Two Channel: LSi-7s (Nakamichi CA-5, NAD 214, Pioneer BDP51fd)
    Vintage Polks: Polk Monitor 5As, Monitor 7Bs [HK 730], Monitor 10As [Marantz 2265], SDA-2Bs [Jolida JD-303, Jolida MV-MK4]
    Headphones: HD600, Q701, ATH-M50s etc. Bravo Audio Ocean amp., Onkyo P-304, Adcom GFA-555, Technics Direct Drive TT

  28. #28

    Member Sales Rating: (1)

    Join Date
    Jul 2001
    Location
    chicago
    Posts
    16,100

    Default

    Quote Originally Posted by cnh View Post
    I must have gotten up on the wrong side of the bed today because every post I've made is that of a crotchety old man?

    cnh
    Know what ? Your allowed my friend. God knows I have those days too and more than I care to admit.

    I guess John is now an official member of the PFB fan club. A t-shirt John, is right up your alley. Put in your order and color preferences early, I have a feeling they'll sell like hotcakes.

  29. #29

    Member Sales Rating: (0)

    Join Date
    Mar 2012
    Location
    MAINE
    Posts
    2,695

    Default

    Quote Originally Posted by cnh View Post
    No pets here, boys! No worries, no duties, no walking anything, no feeding, no cleaning up after, no accidents. PRICELESS!

    I must have gotten up on the wrong side of the bed today because every post I've made is that of a crotchety old man?

    cnh
    now that there is funny ROLMAO. Carry on. Glad you were able to save the signature :)
    RANDY
    ~SDA2b Adcom gfa555 565pre 555t 600cd Pioneer PLa35d
    ~SDA1c Denon POA2200 Yamaha RX-V1(gold) HK25 AT-LP120tt-HT 4/rs Cs400i/cc Premier Acoustic PA-150 subwoofer
    ~Marantz 2252b 5025b 6300tt Tech-a4010s monitor 7b
    ~Yamaha cr2040 Advent2 Monitor 10a
    ~Rotel RV555 monitor 4 series 2 -office-
    ~Pioneer seQ404 headphones

  30. #30

    Member Sales Rating: (12)

    Join Date
    Nov 2008
    Location
    http://audiomilitia.proboards.com
    Posts
    12,406

    Default

    Quote Originally Posted by tonyb View Post
    Know what ? Your allowed my friend. God knows I have those days too and more than I care to admit.

    I guess John is now an official member of the PFB fan club. A t-shirt John, is right up your alley. Put in your order and color preferences early, I have a feeling they'll sell like hotcakes.
    I was going to join actually until I found out I would have to dress like Elton John for the annual PFB weenie roasts...
    HT Setup... Pioneer Elite SC-37, Polk Audio SDA-SRS 1.2TL's , Oppo BDP 93
    Two Channel... Carver Statement 450~1 Vacuum Tube Monoblocks, Dodd Mid-line Tube Linestage with Psvane 12Ax7 tubes, Pioneer Pdd 9Mk II SACD Player, Yamaha PX-3 Turntable with Sumiko BPS EvoIII, Polk Audio SDA-SRS 1.2TLs.


    "Everything we have fought for has been lost, and everything we fought against, we have become...."

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. And now...a moment of zen.
    By Jstas in forum The Clubhouse
    Replies: 7
    Last Post: 05-31-2011, 11:00 AM
  2. And now...a moment of zen.
    By Jstas in forum The Clubhouse
    Replies: 1
    Last Post: 05-13-2011, 12:08 PM
  3. A moment of zen
    By Jstas in forum The Clubhouse
    Replies: 19
    Last Post: 04-28-2011, 07:58 AM
  4. And now...your moment of Zen
    By Jstas in forum The Clubhouse
    Replies: 7
    Last Post: 11-07-2010, 11:56 PM
  5. Ever have this moment?
    By GUNTHER in forum Vintage Speakers
    Replies: 25
    Last Post: 01-25-2007, 08:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts