Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    Member Sales Rating: (0)

    Join Date
    Apr 2014
    Posts
    1

    Default Monitor 55T setup - basics

    I just purchased a pair of Polk Monitor 55t - my first Polk speakers ($50 each after rebate via Newegg, a total steal).
    A couple questions:
    I'm considering biwiring... any advantages or suggestions?
    Also, to anyone that owns these speakers, how have you set your crossover?
    Anything else I need to know or setup before or after connecting them?
    Last, my current center channel is 6 ohm resistance, so I've set my receiver to output 6 ohms. Should I switch this over to 8 ohms for the new speakers?

    Thanks in advance from an audio noob.

  2. #2

    Member Sales Rating: (0)

    Join Date
    Jul 2012
    Location
    central Texas, trailer court on right
    Posts
    746

    Default

    If you're just using an AVR, you will see little if any improvement using 2 out puts from you AVR to power 1 set of speakers. An AVR has one power supply. The more outputs you use, the less power to each speaker wired to it. That's why it states power output 1 or 2 channels driven. Keep it neat and easy, run one set of wires from the AVR to the speakers.

    Let your AVR's auto-cal program set the cross over. Normally it's recommended to start at 80 Hz. If you can start localizing your sub, the cross over is set too high. On the other hand, the more bass signals set to the sub, the more power available for the other speakers you have.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. For Sale Monitor setup & RT setup...one has to go...any takers
    By jojomgee in forum For Sale (FS) Classifieds
    Replies: 11
    Last Post: 08-14-2011, 12:24 PM
  2. Turntable Basics
    By xj4094dg in forum Electronics
    Replies: 10
    Last Post: 09-27-2009, 07:41 PM
  3. Interesting links about Amp basics
    By heiney9 in forum Electronics
    Replies: 0
    Last Post: 05-12-2005, 08:18 AM
  4. break in basics- what should i do
    By Mr X in forum Car Subwoofer Talk
    Replies: 13
    Last Post: 03-20-2005, 06:35 PM
  5. Basics (set up HT system)
    By yikes in forum Basic Hookup/Wiring Questions
    Replies: 5
    Last Post: 01-02-2004, 02:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts