Ok guys, I just took these pics today. So you FINALLY get to see how mean 4 amps looks in a truck.
I'm going to post all the pics I have of the system...
I'll get 2 more pics up soon. One of the Pioneer DEH-940MP head unit, and the other of what it looks like when I have my back seat in. But for now here they are...I hope it doesn't take too long to load for us poor guys with dial-up.
These are Kenwood eXcelon 4x6s.
This is a picture of them in the extended cab area of the truck with the panels off.
Here's with the panels on.
This is a picture of my MM6 component system on the driver's door. The tweeter is flush mounted in the sail panel.
Close up of the crossover and mid-woofer on the passenger side.
Close up of the tweeter. The LED light on the dash goes to my crappy Barracuda alarm system.
Here's a picture of the old MM120s before I got the MM12s. The amp hooked up to the RF 1.0 capacitor is a RF Power BD1000.1. It ended up dying on me last summer(2003). The other amp is a RF Power 500.2 which powers my components.
Here's the "after" picture with the MM12s. It's in the same box and I also added the MOMO grilles.
Here's the new AND IMPROVED back wall where the amps are. I've hidden all the wires except for the power and ground wires. The distribution block you see is where all my grounds are connected too. Left to right: RF Power 350S for the eXcelons, RF Power 550S for the sub on the passenger side, RF 1.0 Farad Capacitor, RF Power 550S for the sub on the driver side, RF Power 500.2 for the MM6 components.
that's all for now...
I do have another RF 1.0 Farad capacitor that I will install sometime soon(just for you Thomas, the extra weight helps keep my truck down so I won't have a high center of gravity going too fast around corners). It'll be installed as soon as Vince can find the charger for it and send it to me. I also need to change the ground wire from the capacitor to the ground distribution block to blue to keep everything the same color, and finally, to screw in the ground distribution block to the wall.
2 Adire Brahma 10" subs
2 Image Dynamics 10" subs
CDT 3-way components in the front
CDT 2-way components in the rear
USAmp's for everything
Second Skin sound deadening for the entire truck.
And if you don't like it, then F*** off...no really...lol