Fxi5 HELP. Base measurements

[boughy]

Since Polk has not gotten back to me in time for my weekend construction I really need your help. Can someone please take measurements on the bottom/base dimensions of their Fxi5's so I can build speaker stands to fit their odd shape? I need the every measurement inclucing the little length in the front. So to give you a clear I dea of what I need I need the meausrements of the bottom of the speaker soI can cut and match a peice of wood to make a stand for the speaker.

If you can take the time to do this I would greatly appreciate it.

[gregure]

Sorry, man, don't know the dimensions. But why not wall mount them? That's what they're primarily designed for, and where they will sound the best.

[PolkThug]

11 3/4 inches wide, about 8 in deep. Flat side in front is 2 1/2 inches. The back side corners come up about 2 inches before they angle towards the front to make the triangular shape.



|-------11 3/4-------|
|
|
8
|
-2 1/2-

[boughy]

Thanks. Let the construction begin. Just as a not for people. I bought all the wood, stain and screws at home depot and it only came to 36$. May be a nice alternative to $100 speaker stands. I am staining them "onyx". try to let you know how it comes out.

[stereo55]

Originally posted by boughy
Since Polk has not gotten back to me in time for my weekend construction I really need your help. Can someone please take measurements on the bottom/base dimensions of their Fxi5's so I can build speaker stands to fit their odd shape? I need the every measurement inclucing the little length in the front. So to give you a clear I dea of what I need I need the meausrements of the bottom of the speaker soI can cut and match a peice of wood to make a stand for the speaker.

If you can take the time to do this I would greatly appreciate it.

You may want to look at this thread :

http://clubpolk.polkaudio.com/forum/...threadid=21586


Niiiiice !!! ;) :D