Sr104

[hifonix]

Well ladies and Gents I have fianlly gotten all my equipment in and the stereo install begins shortly. I have a question, I will be running 2x the SR104's single 4ohm. I have read alot on the forums about the spec sheet being wrong for these subs?
What I was able to find .88 cuft .92 with speaker displacement?
Can anyone tell me if this is correct?

I also purchased my subs from polk direct on ebay, I purchased 3 of the SR104's.

2nd question, my warrenty period has expired and the subs havent been installed as of yet, Do the refurb subs have tensil lead issues like the other SR subs I have read about?

I know their is really no way to tell until they stop working.
off topic comment: a 400$ sub with tensil lead issues seems like a defect...

[hifonix]

I talked to polk today .85 cu ft with woofer displacement already included

[DSkip]

I made my box to be .78 b/c I thought I saw the manual say .66 w/ a .12 displacement. Their recommendation is .85 for a sealed?

[hifonix]

Yes when I called in and talked to a rep thats what I was told

Rep also said that is tuned to 35hz

Install is going down this sunday! We shall see how it sounds

I also found another Hifonics Zues series XI now going to run one on each sr104