Annoying buzz in center channel

[Polkapops]

I posted a couple of problems under the 'Basic hookup/wiring' section with the subject line reading 'Unable to get the .1 out of the 5.1' - I've remedied the lack of bass but basically what I'm now still experiencing is a buzzing sound from the right driver on the center channel at higher volumes. Blown driver? Please let me know what steps I need to take to have this problem serviced. Thank you very much kind sirs!
Dan

[PolkThug]

Connect the center speaker to the L or R main speaker wire and see if the problem is still there.

[Polkapops]

Thanks PT - yep, problem still there.....:(

[Polkapops]

Left Ken a voice mail & will go from there.....

[Kenneth Swauger]

Hello Dan,
Thanks for posting on the Forum. The procedure is pretty straight forward, remove the driver from the cabinet (9/64th Allen wrench, I believe) and disconnect the two wires. Box the driver up and send it to Polk Audio, 2550 Britannia Blvd., Suite A, San Diego, CA. 92154. Please include a short note giving us your name, address and a copy of your sales receipt. The service folks will promptly send a replacement.
Regards, Ken
ps. I tried the telephone number on the v-mail message but didn't get a response.

[Polkapops]

Thanks Ken -
I've got dial up at home so that's why I was not available.
As far as a sales receipt, I originally purchased my RTi speakers through Crutchfield, then saw an entire LSi setup for sale on the Polk site. So I now own the LSi's and do not have a 'sales receipt' per se. Anything else I need to do to expedite my repair? Thanks,

Dan

[Polkapops]

Thank you very much Ken for the quick turnaround -
Got it earlier today and the system is back up and humming!!!
Thanks again sir!
Dan

[Kenneth Swauger]

You're certainly welcome, glad to be of help!
Have fun, Ken