Yesterday I started putting the Second Skin spectrum in my truck. I did a nice thick coat on my doors last night, then I spent a lot of today figuring out how everything came apart inside so I could take the carpet, headliner, and all the panels out. I wound up stripping two of the seat belt bolts due to them being rusted, so they are still stuck there. God damn torex bolts. Any suggestions on a way to get those out would be appreciated. I took a bunch of pics, so as soon as I find the cable to hook it up, I'll post them. I put 2 more thick coats on the doors, a very, very thick coat on the floors and back wall, and a thinner coat on the roof. My oringinal intent was to spray the spectrum on, but when I was putting the quick connect end to hook it up to the air hose, I cracked the spray gun. I'm gonna contact Ant and see if there is anything I can do about that. I wound up painting it on though. Went on easy, and dried rather quick. Not a bad odor to it, did smell a little bit when I went to work this morning, but not too bad overall.