New SR subs

[hrdhtdvr]

Has anyone tried out the new SR subs? Not that I am going to buy one, but just wondering how they sound compared to the Momos and how you like them.:D Also, what are you using them in? (truck, car, etc...)

[MacLeod]

They just now started shipping them if I remember right so, probably, nobody has one yet. My local Tweeter doesnt.

[Greg Peters]

The Polk dealer I went to in WA had some 10s and 12s on display as well as some stock. The place was being renovated when I was there, and the salesman had to hunt before finding they were all sold, displays included.

They are supposed to be pretty great sounding, though. These guys have done some installs with twin SR subs already (and say they get pretty loud, too).

If I can hear one first, I'd consider tossing my 10" for an SR 12. Ideally, they'll have a 12DVC in a sealed box I can try out in the car next time I'm in there.

[brettw22]

The sad thing is I've had 2 for a while and haven't been able to do anything with them because I haven't done the amp install blah blah blah.......

Some day.......

[MacLeod]

The sad thing is I've had 2 for a while and haven't been able to do anything with them because I haven't done the amp install blah blah blah.......

Some day.......

What are you waiting for?!? Its not like you have a job anymore!

[DSkip]

the dealer down here got a few in i saw about a month ago. theyre massive and look amazing. if i had an income right now i would definitely have those and the sr6500s. the guy basically sells them wholesale.

[heXtant]

they are for sale on cardomain for 350 a piece. the 10s are 300.
http://www.cardomain.com/item/POLSR124DVC

i found 2 sr12's for 555 that i might just buy.. still trying to decide.

[brettw22]

What are you waiting for?!? Its not like you have a job anymore!

I was originally going to build the box as a dual sub box with a partition, but decided i wanted to cut it in half.....

My friend has a mitre saw, but it doesn't extend so i'm not getting clean cuts for the angles, so either I"m going to buy a table saw or rent one to get the pieces cut so i can be more consistent than just trying to freehand with a jig or circular.

[MacLeod]

Youre not a real car audio dork until youve built your box with using only a jigsaw on the tiny 6' x 6' deck of your apartment! ;)

[exalted512]

Youre not a real car audio dork until youve built your box with using only a jigsaw on the tiny 6' x 6' deck of your apartment! ;)

and with only 4 sides!

[audiobliss]

ROFLMREO!!!

:p:D

[brettw22]

Mac won't ever escape that....lol.

I already have plenty of **** in the apartment so I can't be adding to the mix.

[brettw22]

ROFLMREO!!!

:p:D

tard

[exalted512]

tard

+1...

[MacLeod]

ROFLMREO!!!

:p:D

Gotta love ya Bliss. You wont even abbreviate a cuss word.

and with only 4 sides!

[exalted512]

what??????

[xtorted]

I have one of the DVC 10s sitting in my living room waiting for my enclosure to be finished. If I’m real lucky I’ll be able to test it out this weekend. At 25 pounds I had to add a few extra layers of fiberglass to the front just to make sure it'll be ok, that set me back a few days. I didn't realize it was so heavy compared to the 12" momos I had (the cast aluminum basket ones).

[brettw22]

I have 2 of the 12's

What is the face of your box made of that you need to reinforce with extra layers of fiberglass? I'm using 3/4 MDF for the box, and don't anticipate any problems in keeping it supported.

[audiobliss]

I imagine it was fiberglass the start with, but just wasn't thick enough to support such a substantial sub.

[Greg Peters]

The sad thing is I've had 2 for a while and haven't been able to do anything with them because I haven't done the amp install blah blah blah.......

Some day.......

Well when you get the time...be sure to say how you like them on the forum (so the rest of us can start saving up the $$$).

Maybe someone can email you every hour until they're installed, as motivation for an update sooner rather than later ;) .

[1996blackmax]

Would be interesting to read about how they sound.....

[xtorted]

I have 2 of the 12's

What is the face of your box made of that you need to reinforce with extra layers of fiberglass? I'm using 3/4 MDF for the box, and don't anticipate any problems in keeping it supported.

It's all fiberglass, with an MDF ring. I just didn't expect such a heavy sub so I figured I got it all out why not add 2 more layers of fiberglass just to be sure.

The enclosure isn't all that big, it just makes the .66 cubic feet of air space polk recomends, but after all the time i'm putting into this i don't need to hit a bump or just be driving down the street and then all of the sudden...crack. I went over kill on my last box, the same here wont hurt :)

I must go now, gotta rewire the back of my car now so I can hook my amps up.

[hrdhtdvr]

So I guess that since they weigh in at 25 pounds, they would not be too well recieved by a MTX thunder form that is made out of plastic. :D

[MacLeod]

The MTX Thunderforms are a little tougher than your run of the mill plastic enclosures.

But that doesnt mean Id want to run an SR in one.

[Thom]

The SR's are quite an improvent over the Momo's, or the old db's, for those that were so fond of them. The Momo's are nice subs, for the SR's to poop on.

They'll work in enclosures as small as the current subs (.65 and .85), but you'll get better low end in a larger box (like 1 and 1.25). And they kick ass in ported boxes, but be prepared to give up even more space.

It wouldn't be a bad idea to use a 1" (or thicker) baffle to mount them to, they're quite a bit heavier than any woofer we've ever had.

[Thom]

So I guess that since they weigh in at 25 pounds, they would not be too well recieved by a MTX thunder form that is made out of plastic. :D

They're a couple inches deeper than our other subs, so they wouldn't likely fit to test the theory...

[Greg Peters]

The SR's are quite an improvent over the Momo's, or the old db's, for those that were so fond of them. The Momo's are nice subs, for the SR's to poop on.

Since you seem like you've had some time listening to the SR subs, how would you describe them? SQ? SQL? SPL?

Are there any similar products from competitors (that we might be more familiar with) that the SRs compare to in sound, yet also "poop on"?

I see that these have a fairly high rms power rating (700 watts continuous), so do you think they'll need all of that rated wattage to sound their best? I just upgraded my sub amplifier (but it's only 600 rms) and would hate to have to upgrade again right away should I get an SR124 DVC.

[MacLeod]

Polk Audio is all about SQ so I would assume their top of the line subs will be as well.

Id also be willing to bet that 600 watts would be ok.

As far as competitors, they designed them to match up to the W6, which is one of the best SQ subs ever so that could give you some idea on what theyre like.

[1996blackmax]

There are subs out there that I would take over the W6 any day of the week....

[MacLeod]

Good for you.