Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 2 of 2

Thread: Polk/Momo MM10

  1. #1
    Chris
    Guest

    Question Polk/Momo MM10

    I just installed a Polk/Momo MM10 with a 500 watt rockfard amp and its hits perfect but the sub hits the grill thats covering the sub. I dont wanna take it off cause it looks amazing. I was just wondering if it would damage my sub or not, or if anyone had any suggestions.

  2. #2

    Member Sales Rating: (0)

    Join Date
    Aug 2002
    Location
    Buffalo, NY
    Posts
    3,962

    Default

    well... one of two things bud...

    either the sub is defective (some of the momo's were recalled due to the surround not being glued down as well as they expected it to be and the sub would flap like you are describing).

    or... more likely --- you're dumping an "a$$-load" of power on it, and the grille is just too close to the sub.

    If this is the case, I have a good suggestion for you.

    Take the grille off, and get about 20 metal washers... put 5 under each screw where the grille screws down.. this way you've "raised" the grille about 1/4 inch off the surface of the box... that way u keep your snazzy grille look while you have added enough distance for the woofer to excurt to its full potential.

    and yes, if you repeatedly slam the woofer hard enough into the grille, it's gonna take a toll on the suspension.
    "With your own attitude it is hard to survive here... But who gives a damn, we are here to change the world, and we dont need a password for that."
    - Anurag

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts