Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Member Sales Rating: (3)

    Join Date
    Apr 2005
    Location
    Miami, FL
    Posts
    279

    Default Wiring for LSI Series with an AMP

    I understand how its supposed to hook up.

    Amp Pre-amps to Amp

    Amp to Speaker.

    Wiring specifically, i have looked on forums where to buy cables.
    One of the ones that comes up mainly is Blue Jeans Cables
    http://www.bluejeanscable.com/store/speaker/index.htm

    Now which type of cable from there and what gage?
    Also bare wire or plugs? I dont know if any or which plugs fit into teh LSI series....

    Also i will need The Cable for Pre-Amp to Amp. Are those just RCA audio cables?
    http://www.bluejeanscable.com/store/audio/index.htm

    Thanks for your help.

    Just want to get everything right before starting to order the whole deal.

    Edit:
    AMP and AVR will be withing a Foot of each other on a A/V Rack.

    Speakers from AMP will be withing 10ft.
    Last edited by mwaarna; 01-12-2007 at 04:47 PM.

  2. #2

    Member Sales Rating: (1)

    Join Date
    Jan 2004
    Location
    Quincy, MA
    Posts
    11,642

    Default

    You have got it all figured out perfectly! Pick which ever guage speaker wire that you like. LSI's will take bare, spades or bananas. I prefer bananas for ease of use.

    I use the 1505F's for my IC's. Well made cable that doesn't cost an arm & leg and goes off & on like a dream!
    Sunfire TGP III PrePro, Sunfire Cinema Grand Signature 405wpc 5 ch. Amp, Rotel RCD-1072 CDP, Onkyo TA2600 Tape Deck, Pioneer Elite 47-A DVD, Sony 32" XBR TV, Polk RTA-8T Main Speakers, Boston VR-920 Center Channel, Boston PV-600 Subwoofer, Polk DSW 400 Subwoofer, Polk FXi-3 Surround Speakers

  3. #3

    Member Sales Rating: (7)

    Join Date
    Aug 2004
    Location
    Central Illinois
    Posts
    5,247

    Default

    RCA for source to pre-amp (x2 for right and left channel). (or if digital connection - optical or coax (just one since all channels are carried over the same wire).)

    RCA (or perhaps balanced if amp AND preamp support it) for each channel that the amp is going to amplify.

    Speaker wire from the amp to the speakers. I would recommend bare or bannana plugs. The terminals on the LSi's are really wide and many spade connections do not fit it. It will take 10 or 12 guage bare wire with no problem. I have the 10-white cable from blue jeans cable. It works well, but if you need to do any cable routing (under baseboard, around fixtures, etc.) it is really thick and not very flexable. If you have any routing to do, I would get 12 guage and not worry about it. If it is going to run along the floor to your speakers and just sit there - the 10 guage is nice and you never have to worry about it again. (until you need a longer cable....)

    I use banana's cuz they are easy. I purchased the wire bare and added them later though.

    Michael
    Mains.............Polk LSi15 (Cherry)
    Center............Polk LSiC (Crossover upgraded)
    Surrounds.......Polk LSi7 (Gloss Black - wood sides removed and crossovers upgraded)
    Subwoofers.....SVS 25-31 CS+ and PC+ (both 20hz tune)
    Pre\Pro...........NAD T163 (Modded with LM4562 opamps)
    Amplifier.........Cinepro 3k6 (6-channel, 500wpc@4ohms)

  4. #4

    Member Sales Rating: (3)

    Join Date
    Apr 2005
    Location
    Miami, FL
    Posts
    279

    Default

    Thanks for the info.

    Ordered from Blue Jeans

    4 foot BJC LC-1 Stereo Audio Cables Cable Color: White
    1 $33.75 USD
    45 feet of BJC "Ten White" Speaker Cable, Unterminated NOTE: Unterminated cable; no connectors
    1 $35.55 USD

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Replies: 7
    Last Post: 10-28-2006, 09:16 AM
  2. Replies: 7
    Last Post: 03-23-2006, 01:55 PM
  3. Single LSi series wiring
    By okiepolkie in forum Basic Hookup/Wiring Questions
    Replies: 7
    Last Post: 09-17-2004, 08:40 AM
  4. Replies: 6
    Last Post: 11-19-2003, 01:41 PM
  5. Bi-wiring RT5000 series
    By samplesj in forum Basic Hookup/Wiring Questions
    Replies: 2
    Last Post: 01-04-2003, 12:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts