nOOb question about c300.2

[_mo_]

Hey folks,

I did a bad thing and got a used c300.2 off of Ebay w/out doing all my research. I got a great deal, mind you, just shouldn't have impulse bought.

Anyway, I'm getting some mixed messages from the forums about the ability of this amp to power 2 polk/momo 10 inch subs. Am I right that if I get two of the MM2104DVC's and then bridge the AMP and wire the coils in series and the speakers in parallel, like this, that it should work well?

Thanks for the help

[MacLeod]

Right.

A pair of DVC subs would be 2 ohms wired in parallel or 8 ohms wired in series.

Wire both subs in series for an 8 ohm load per sub and then both subs wired in parallel to the amp for a 4 ohm mono load. That is well within the operating range of the 300.2

[_mo_]

That's what I figured. Thanks a lot Mac!