SRS 2 Crossover Parts List?

[Lasareath]

Hello All,

I think I want to redo my crossovers for my 1986 Blade/Blade SRS 2's

Does anybody have a Parts Lists for me?

I tried to read the PDF but some of the stuff is not legible and some of the writing on the caps is blurred out on the crossovers.

Thanks!!!

Sal

[ben62670]

Are these the same as the ones you sent me?

[Lasareath]

Are these the same as the ones you sent me?

Yes, And I have another pair here as well. So I can work on them and still use the speakers ;)

[ben62670]

You can't get the values off either set? If not give me a call I have mine here inthe open;)

[Face]

I'd help, but the pair I'm babysitting are PB.

[Lasareath]

You can't get the values off either set? If not give me a call I have mine here inthe open;)

I didn't look at both sets, I will first, I was hoping somebody had a list of parts, and can just copy clip it :)

[zingo]

I think this is the right component list for blade-blade SRS 2:

2x 2.7 Ohm 5w resistor
2x 3.5 Ohm 5w resistor
3x 750 pf capacitor
1x .5 uf capacitor
2x 12 uf capacitor
2x 27 uf capacitor

[ben62670]

I think this is the right component list for blade-blade SRS 2:

2x 2.7 Ohm 5w resistor
2x 3.5 Ohm 5w resistor
3x 750 pf capacitor
1x .5 uf capacitor
2x 12 uf capacitor
2x 27 uf capacitor

That appears to be the parts list for a "B/B", but the lack of a 135uf, and 65uf piggy backed makes me think that its the inbetween model. Also the older B/B's used 34uf's on the lows;)
Ben

[zingo]

Las, just pick a combo of what Ben and I posted and you'll be good to go! :D

[ben62670]

Las, just pick a combo of what Ben and I posted and you'll be good to go! :D

Who gets the leftovers?:)

[Lasareath]

I think this is the right component list for blade-blade SRS 2:

2x 2.7 Ohm 5w resistor
2x 3.5 Ohm 5w resistor
3x 750 pf capacitor
1x .5 uf capacitor
2x 12 uf capacitor
2x 27 uf capacitor

Is that list per speaker?