Outlaw just announced the specs for their new pre amp.. Outlaw Audio model 997
It's not available yet.. you just have to wait.
Main Features
• HDMI 1.3 with Deep color support
• Lossless Audio: Dolby TruHD; DTS Master Audio
• Dolby Digital EX, Dolby Pro Logic IIx fully adjustable, Dolby Virtual Speaker, Dolby Headphone Layers 1, 2, 3
• DTS-ES Discrete and Matrix, DTS-96/24, DTS NEO-6
• Analog to Digital Video Transcoding
• Silicon Optix Reon scales all video up to 1080P
• XM Radio "Connect and Play" w/ Neural Surround
• Bi-Directional USB/RS-232
• Upgradeable Firmware
• Multi-room/Multi-Source Capable
• Advanced GUI On-Screen Display
• 7.1 Multi-channel Analog Input
• OSD over HDMI
• A/V LipSync Delay per Input (0-200mS)
Audio/Video Features
• Dual TI 32-bit DSP processors
• Quadruple Crossover
• Surround Preout Reassignement (Bi-amp)
• 4 HDMI inputs, 1 Output
• Theater Compensation
• Balanced Audio Outputs
Trinnov Optimizer
• Includes 4 Microphone Capsule Acoustic Probe
• FIR and IIR filters to flatten speaker response
• Loudspeaker (RE)Mapping
• Supports ITU Surround Music and SMTPE Cinema Standards
• Before/After Curves availble to USB output for Analysis
Additional Features
• High performance tuner
• Direct access station tuning via remote control
• 30 Station Presets
• Room 2 A/V Output with fixed/variable audio level, S-Video and coaxial digital
• IR control with 2 inputs and 1 output
• Dedicated Room 2 Remote
• Front Panel A/V and Mike Input
• Video Input Renaming
• Channel Level Memory
• 12-volt Trigger
• Aluminum Front Panel
Trinnov Optimizer
Model 997 FAQ
Coming Soon
Preliminary Specifications:
• Input Sensitivity/Impedance: 200mV @47k ohms
• Maximum Output: 9 V
• Volume Range
Main: -76dB to +10.0 dB (1dB resolution)
• Bass Management
Low-Pass Slope Crossover Frequency (Small Speaker Setting) (Adjustable 40/60/80/100/120200Hz): 12 dB/octave (2nd order)
High Pass Slope (Subwoofer) 24 dB/octave (4th order): 40-120Hz as above
• Tone Control
Bass Center Frequency/Range: 100Hz / ± 10dB
Treble Center Frequency/Range: 10KHz / ± 10db
• Channel Separation (at 1kHz): 87dB
• Frequency Response
Line: 10 Hz to 100 kHz +/- 1dB
• S/N Ratio (ref. 2.3Vrms): >105dB
Video Section
Input Sensitivity/Impedance: 1V p-p/75 Ohms
Output Impedance:1V p-p/75 Ohms
Frequency Response: Composite/S Video: 10Hz-10MHz Component Video: DC-100MHz
S/N Ratio: 50dB
Digital Audio
All digital audio inputs and outputs are to S/PDIF electrical (75 ohms, 0.5 Vp-p), S/PDIF optical (Toslink), standards as appropriate.
Coax: 2 In
Optical: 5 In
Processor: Dual TI 32 bit
FM Tuner Section
Usable Sensitivity, THD 3% S/N 30dB: 17.2 dBf
50 dB quieting sensitivity
Mono: 25.2dBf
Stereo: 43.2 dBf
S/N Ratio, 60dBf
Mono: 72dB
Stereo: 68dB
THD 65 dBf
Mono: 0.2%
Stereo: 0.3%
Stereo Separation: 40dB typ.
Capture Ratio: 3.0 dB
IF rejection ratio: 120 dB
AM Tuner Section
Usable Sensitivity: 500uV/m
S/N: 40dB
Selectivity: 30 dB
Image rejection: 33 dB
General
Supply Voltage: 120V, 60Hz only
Power Consumption: 50W
Dimensions
Width: 17.38 inches
Height: 7.75 inches
Depth: 17.75 inches
Trigger Outputs: Sequential Delay 50 mA @ 12 VDC

Reply With Quote

