Looking for advise on sq enhancement from my set up.
hu: pioneer 880prs all settings at 0 eq settings largely at 0 some at +1 some at -1. Time alingment used.
Front : Polk 6.5 momo's tweets at -6 crossed over from hu at 63hz 12db/oct
Rear : momo 691 set at -3 gain from the hu crossover at 80hz 12db/oct
Sub: momo 2124
4 ch amp: pa500.4 front gain 11 o'clock rear at 9:30
Mono : 400.1 I know sub is under powered.
Have had this setup for abt a year now. Front doors deadened with dynamat. Basic 1 layer on outer skin of door, 2x12" behind each mid and sealed with one layer. My question is what should I do next to build sq?
1. How important are the cables that run up and down the length of the cabin and connect the amp to the crossovers? crossovers to speakers? hu to amp?
2.Is it better to take up one area at a time and focus on that or do a bit of everything and then come back to the doors? Value in deadening the floor wells and behind the dash?
I basically want to "hear" as close to the max potential of the speakers while setting up the base for an eventual upgrade to sr fronts and sub (momos will go to the back)
tks a ton