Okay so I bought a Polk MM1040 and hooked it up to a pioneer 760w 2 channel amp http://www.newegg.com/Product/Produc...82E16882117110 and have it hooked up in bridged mode so it should be putting out 380W rms. I have the crossover on the amp turned off, and the bass boost on the amp turned to 6dB. I set the gain just before the 4V mark for pioneer recievers, which is what I have. With all bass boost turned off there's basically no sound coming from the sub. I have to crank the boost up to 5/6 or 6/6 to get bass with the volume below 1/2 way up. I have the HPF turned on and set to 100hz, and the crossover set to 100hz on the reciever.
Now my concern, is that before the sub gets very loud(its a 350w sub, it should be louder than my 180w at home), it starts distorting. I'm wondering why this is happening?