will any of these polyswitches work in my 2.3tl's?

[zarrdoss]

Not having any problems yet but was wondering if any of these would work in my 2.3tl's? I was going to place a PE order soon and was going to throw some of these on here if they would work.

http://www.parts-express.com/wizards...tches&x=24&y=5

[nooshinjohn]

contact polk cs tomorrow. they will most likely still have them and will send them to you free of charge.

[zarrdoss]

cool thanks

[amulford]

Take them out and jumper it with good quality wire. You don't need them...

[inspiredsports]

Take them out and jumper it with good quality wire. You don't need them...

Yes they are a huge compromise, but with all due respect I would qualify that advice.

--- If you have clean audio sources and are reasonable about turning your volume down if you sense distortion, remove and "jumper" them.

--- If you crank it with reckless abandon and/or have low quality sources/amps/etc., replace them.

[AudioGenics]

good info

[inspiredsports]

good info

Um, yeah, . . . that's why I offered it. I'm not in the habit offering bad info.

[amulford]

Yes they are a huge compromise, but with all due respect I would qualify that advice.

--- If you have clean audio sources and are reasonable about turning your volume down if you sense distortion, remove and "jumper" them.

--- If you crank it with reckless abandon and/or have low quality sources/amps/etc., replace them.

Excellent advice. I was hoping he already knew it...

[zarrdoss]

Excellent advice. I was hoping he already knew it...

I did from previous threads but after just spending $300 for new 198's and my luck I figured all the insurance I can get. Polk CS is awesome sent me 4 new ones and got them in two days! I will install when I really get bored.