MM2084 dual sealed box

[zyssai]

Hi!

I want to make a box for 2 subwoofers MM2084 8"
I think dual sealed box is the better choice, isn't it?

Every sub must be in a seperate volume or I can mount the 2 subs in the same volume?

Thanks and sorry for my english, I'm french :)

[Kim]

If both subs are being driven by the same amplifier then you can build a common chamber enclosure for both subs. the recommended sealed enclosure volume for both subwoofer is .75 to 1.0 cubic feet. For an exteneded bass response and a "Q" of 0.707 the sealed enclosure volume using minimal damping material is 1.55 cubic feet. You can reduce the internal volume down to .99 cubic feet if the enclosure is heavily damped.

[cadenceclipse]

so for seperate boxes you would divide by 2? also what is meant by damped? u mean like poly-fil or dynamat?

[zyssai]

thanks for your answers ;)

but finally, I will install only one subwoofer :o
because of my amp, I have only 1x230rms 4ohms, and I don't have enough money to replace it :(

so another question, the recommanded volume for a sealed enclosure for one mm2084 is 9.9l (0.35cu ft3), but I must remove the subwoofer volume or not?
and if I want to mount it inversed? the volume will be reduced but how many?

Another question :D what crossover frequency do you recommand for this subwoofer? I think 80Hz @12db?



Many thanks!!! (and sorry for my english :o )

[cadenceclipse]

unless their dvc, then u could do 2.