Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    Member Sales Rating: (16)

    Join Date
    Oct 2005
    Location
    Sunny SoCal
    Posts
    2,382

    Default HDMI from Denon 3910 problem

    Just received the Pioneer Elite VSX-92TXH and have it hooked up. It has 3 HDMI inputs and 1 output (to HC1500 projector). So far, I have two HDMI devices. The Samsung HD tuner works fine. I get both audio and video without any problems.

    The Denon 3910 is another story. When selecting DVD and the correct HDMI input, I get NO audio or video output. I finally figured out after a bunch of tweaking with it that if I don't have the projector turned on or I have the projector set to a different input (i.e. s-video) rather than HDMI, I get audio just fine from the Denon.

    I tried changing the HDMI settings on the Denon between 720p and 1080i as well as from RGB to YCBr setting. No luck.

    When the Denon is connected directly via HDMI to the projector without the amp in the middle, I get video signal no problem.

    Any ideas are greatly appreciated.
    _____________________________________________
    Home Theater: polkaudio Modded SDA SRS 2.3TL's, LSiM706c, 4 X TC265i Rears, SVS PB12 Plus/2
    Pioneer Elite SC-67, Sunfire Signature Cinema Grande 400, Oppo BDP-83

  2. #2

    Member Sales Rating: (3)

    Join Date
    Jan 2009
    Location
    Northern CO.
    Posts
    2,429

    Default

    could be the HDMI switching devise in your receiver, but lets see what others have to say.
    Last edited by zarrdoss; 06-13-2009 at 11:30 AM. Reason: because I'm not perfect

  3. #3

    Member Sales Rating: (16)

    Join Date
    Oct 2005
    Location
    Sunny SoCal
    Posts
    2,382

    Default

    BTW, tried this on both HDMI inputs 1 and 3 with the same result. (HDTV tuner is on input 2) Projector shows a green screen, then displays no signal so it looks like the amp is trying to synch with the projector but can't. I'm guessing it might be an incompatibility of the DVD player since I have 1 device working fine.
    _____________________________________________
    Home Theater: polkaudio Modded SDA SRS 2.3TL's, LSiM706c, 4 X TC265i Rears, SVS PB12 Plus/2
    Pioneer Elite SC-67, Sunfire Signature Cinema Grande 400, Oppo BDP-83

  4. #4

    Member Sales Rating: (6)

    Join Date
    May 2005
    Posts
    4,373

    Default

    Did yu assign the HDMI port on the reciever to the input you are using?

  5. #5

    Member Sales Rating: (16)

    Join Date
    Oct 2005
    Location
    Sunny SoCal
    Posts
    2,382

    Default

    Sure did. Tried assigning both output 1 and 3. When selecting DVD on the receiver, the projector clearly is receiving some sort of signal because the image turns green for a few seconds, then returns to a 'no signal' state.

    I guess just to be sure, I should try the DVD player on HDMI out 2 since I know without a doubt that it is working for my HDTV tuner.
    _____________________________________________
    Home Theater: polkaudio Modded SDA SRS 2.3TL's, LSiM706c, 4 X TC265i Rears, SVS PB12 Plus/2
    Pioneer Elite SC-67, Sunfire Signature Cinema Grande 400, Oppo BDP-83

  6. #6

    Member Sales Rating: (10)

    Join Date
    Jun 2007
    Location
    Cape Cod, Massachusetts
    Posts
    1,286

    Default

    The Denon configuration has a ton of stuff related to HDMI. I don't use HDMI so I've never really payed to much attention to them, but to start make sure your "Pure Direct" setting (bottom right button on the front panel) is set to "Normal", and then either fiddle with the HDMI button on the front panel or hook it up via component temporarily so you can get into the menus and play with the settings.

    Good luck, hope you can get it working.
    Speakers: Polk LSi15
    Pre: Adcom GFP-750 with HT Bypass
    Amp: Pass Labs X-150
    CD/DVD Player: Classe CDP-10
    Interconnects: MIT Shortgun S3 Pro XLR
    Speaker cables: MIT MH-750 bi-wire
    TT:Micro Seiki DD-35
    Cartridge:Denon DL-160
    Phono Pre:PS Audio GCPH

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Denon 3910 vs. 2910
    By Schwingding in forum Electronics
    Replies: 3
    Last Post: 05-04-2007, 11:16 AM
  2. Help setting up Denon 3910 please
    By joeparaski in forum Electronics
    Replies: 8
    Last Post: 03-24-2007, 09:53 AM
  3. Denon DVD 3910
    By P.HUNT in forum For Sale (FS) Classifieds
    Replies: 11
    Last Post: 04-19-2006, 11:34 AM
  4. Denon dvd 3910
    By dholmes in forum Electronics
    Replies: 5
    Last Post: 09-06-2005, 08:11 PM
  5. New Denon 3910 DVD Player!
    By hamzahsh in forum Electronics
    Replies: 13
    Last Post: 09-09-2004, 11:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts