2) micro1000s w/ 1) LFE output - Page 2

levlhed · 11-10-2009, 04:50 PM

Quote:

Originally Posted by mak99

* I see these spikes use a 1/4-20 thread, so if the microPro uses the same thread pitch, you could buy those spikes and just not use the inserts part...

Yes, I know.
The question remains, what is the microPRO thread pitch?

dorokusai · 11-10-2009, 05:31 PM

1/4 - 20

levlhed · 11-10-2009, 05:38 PM

sweet.
thanks.

mak99 · 11-10-2009, 11:03 PM

Quote:

Originally Posted by dorokusai

1/4 - 20

Did you get this confirmed directly from Polk? If so, it'll be a race to order from Parts Express...

levlhed · 11-13-2009, 12:55 PM

they fit, though a little "loose". Firms up when you screw them all the way in.

However, I did not like the way they worked. I have the subs sitting on 12"x12" concrete paving blocks with 2 block on top of them. They still jumped too much. They are much better in my set up with the standard rubber feet.

mak99 · 11-17-2009, 02:12 AM

Quote:

Originally Posted by levlhed

they fit, though a little "loose". Firms up when you screw them all the way in.

Sorry to hear this. These were the P/E spikes, correct?

levlhed · 11-17-2009, 10:27 AM

Yes, the Parts Express spikes. They are fine if you screw them in all the way. I don't think they'd work well if you need to level-adjust.

leroyjr1 · 11-17-2009, 10:36 AM

Quote:

Originally Posted by levlhed

Yes, the Parts Express spikes. They are fine if you screw them in all the way. I don't think they'd work well if you need to level-adjust.

You could always add a nut to the spikes or us the screwed on washer that come on the original feet. That way you'll be able to adjust it.

11-10-2009, 05:31 PM	#32
dorokusai Hardcore Member Sales Rating: (41) Join Date: Feb 2003 Location: 6 Feet Under Posts: 17,648	1/4 - 20 __________________ Death is my set, guess my religion

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
no output from my HK. . .I think	buyitnow	Troubleshooting	5	07-10-2007 03:15 PM
Measuring Output	zingo	Electronics	6	01-19-2007 05:49 PM
Din Output ?	beardog03	Basic Hookup/Wiring Questions	4	04-11-2005 05:05 AM
WTB: DTV rec. w/DD output	gmorris	Wanted (WTB) Classifieds	0	03-12-2004 03:53 PM
Output to Output?	Sumflow	Basic Hookup/Wiring Questions	3	01-09-2003 12:51 AM

11-10-2009, 05:38 PM	#33
levlhed Polkie Member Sales Rating: (0) Join Date: Nov 2009 Posts: 21	sweet. thanks.

11-13-2009, 12:55 PM	#35
levlhed Polkie Member Sales Rating: (0) Join Date: Nov 2009 Posts: 21	they fit, though a little "loose". Firms up when you screw them all the way in. However, I did not like the way they worked. I have the subs sitting on 12"x12" concrete paving blocks with 2 block on top of them. They still jumped too much. They are much better in my set up with the standard rubber feet.

11-17-2009, 10:27 AM	#37
levlhed Polkie Member Sales Rating: (0) Join Date: Nov 2009 Posts: 21	Yes, the Parts Express spikes. They are fine if you screw them in all the way. I don't think they'd work well if you need to level-adjust.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)