Old Sub ?

sgoodsell · 04-25-2002, 02:18 PM

I am trying to find specs for a EX II series sub. It says EX10 on the back, and the ser. num is EX 101443.

RuSsMaN · 04-25-2002, 05:16 PM

1mm thick mineral filled polymer cone, injection molded polypropylene dustcap, rubber surround.

4 layer, 2" voice coil, vented pole piece.

4 ohm, 20-400Hz, 150 wrms-300 peak, 92dB spl

Enlcosure sizes:
Sealed- .65ft
Ported- 1.0ft port-3"x9 7/8"
Bandpass- total 1.1ft, front chamber .5/rear .6 port-3"x9 7/8"

Fs 32.47 Hz
Re 3.34 ohms
Qms 8.27
Qes .48
Vas .45

Depth - top mount 4 11/16", bottom mount 5 1/16"
Diameter - 9 1/16"

Cheers,
Russ

gidrah · 04-26-2002, 05:01 AM

Good job Russ.

And ya'all thought we couldn't merge.

RuSsMaN · 04-26-2002, 12:38 PM

That one was easy, first I actually used the 'search' feature, and typed in EX10. Took me straigh to a post I made quite some time ago on the same subject....

I use the same sub in my truck, in a sealed .7ft box with 200~ clean watts, its a good sub, very musical.

Cheers,
Russ

Toxis · 09-06-2005, 05:18 AM

PoweredByDodge, can you help with this one too?

hahaha

Sorry, it's late and I'm tired and feeling awnry.

04-25-2002, 02:18 PM	#1
sgoodsell Polkie Member Sales Rating: (0) Join Date: Apr 2002 Posts: 1	Old Sub ? I am trying to find specs for a EX II series sub. It says EX10 on the back, and the ser. num is EX 101443.

04-25-2002, 05:16 PM	#2
RuSsMaN Hardcore Member Sales Rating: (27) Join Date: Jul 2001 Location: North Texas Posts: 16,018	Ask and ye shall receive.... 1mm thick mineral filled polymer cone, injection molded polypropylene dustcap, rubber surround. 4 layer, 2" voice coil, vented pole piece. 4 ohm, 20-400Hz, 150 wrms-300 peak, 92dB spl Enlcosure sizes: Sealed- .65ft Ported- 1.0ft port-3"x9 7/8" Bandpass- total 1.1ft, front chamber .5/rear .6 port-3"x9 7/8" Fs 32.47 Hz Re 3.34 ohms Qms 8.27 Qes .48 Vas .45 Depth - top mount 4 11/16", bottom mount 5 1/16" Diameter - 9 1/16" Cheers, Russ

04-26-2002, 05:01 AM	#3
gidrah Polkologist Member Sales Rating: (1) Join Date: Jul 2001 Location: 'burb of Detroit Posts: 3,000	Good job Russ. And ya'all thought we couldn't merge. __________________ Make it Funky!

09-06-2005, 05:18 AM	#5
Toxis Polk Expert Member Sales Rating: (12) Join Date: Jun 2004 Location: Kansas City Posts: 4,192	PoweredByDodge, can you help with this one too? hahaha Sorry, it's late and I'm tired and feeling awnry. __________________ Never kick a fresh turd on a hot day. Home Setup: Panasonic AE1000U Projo, 92" Stewart Firehawk, Denon 3805 (pre/pro), PS3, Denon DVD-2910, Myryad MA-500 5ch amp, LSi9x2 (Front and Rear), LSiC, Sunfire Super Junior Subwoofer, Sanus UF26 & NF36 Stands, and most wires by Cobalt. Car Setup: OEM Radio, RF 360.2v2, Polk SR6500 quad amped off 4 Xtant 1.1 100w mono amps, Xtant 6.1 to run a JL 10w6v2 in a Stealthbox, all Stinger wiring and Raammat deadener. Done!! Time to tune...

04-26-2002, 12:38 PM	#4
RuSsMaN Hardcore Member Sales Rating: (27) Join Date: Jul 2001 Location: North Texas Posts: 16,018	That one was easy, first I actually used the 'search' feature, and typed in EX10. Took me straigh to a post I made quite some time ago on the same subject.... I use the same sub in my truck, in a sealed .7ft box with 200~ clean watts, its a good sub, very musical. Cheers, Russ

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)