Monsoon-front speakers problem

killabee · 04-30-2003, 08:01 PM

I have a 99 camaro with a monsoon system
I installed the gxr6e model 6 3/4 in the door.
When I removed the factory there was a 4 wire
setup-2 pos, 2 neg.
First I spliced the like wires but it made the speakers
pop/crack so I used just one of each.
The speakers play but lower than the rest.
I have 4 ohm pioneers in the b pillars
and factory 2 ohms in the back hatch.

Is it a wiring problems or are the 2 ohms
overplaying?

rs159 · 04-30-2003, 08:19 PM

Post in car audio, you'll get better advice there.

04-30-2003, 08:01 PM	#1
killabee Polkie Member Sales Rating: (0) Join Date: Apr 2003 Location: PA Posts: 2	Monsoon-front speakers problem I have a 99 camaro with a monsoon system I installed the gxr6e model 6 3/4 in the door. When I removed the factory there was a 4 wire setup-2 pos, 2 neg. First I spliced the like wires but it made the speakers pop/crack so I used just one of each. The speakers play but lower than the rest. I have 4 ohm pioneers in the b pillars and factory 2 ohms in the back hatch. Is it a wiring problems or are the 2 ohms overplaying?

04-30-2003, 08:19 PM	#2
rs159 Polkhead Member Sales Rating: (0) Join Date: Jan 2003 Location: Over the river and thru the woods Posts: 1,028	Post in car audio, you'll get better advice there.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)