Systems Showcase

Gallery

The screen is a DaLite acoustically transparent Audio Visions and the CS1000P center is behind it. Having the center channel behind the screen really anchors the dialog where it belongs. This may seem small but in a large screen (almost 10 feet diagonal) the sound shouldn't come from six feet away from peoples mouths.

I use separate Carver THX certified TFM 35x amps for each of the five mains and two Carver M1.0 amps for two Snell THX subs (sorry you will have to upgrade me for me to change the subs, I can be bought).

CS1000P center is behind the screen.

I have modified the SDS's by installing very high quality caps and a bypass setup. This improved transient response. They sound truly fantastic. I also glued and screwed plates and adjustable spikes to the bottom of the SDA's because you could physically see them move under load. You can barely see the plates under them in the pics. They are not sitting on these plates they are attached! This mod really tightened up the low end.

There is also a Pronto remote that can turn the entire system on, off and switch components with one single button press.

There are also acoustically transparent panels on both sides of the screen and above to effectively remove the wall. I did this instead of moving the SDA's further out into the room.