Car
PA330.2
High-performance 2-channel mobile audio amplifier
1 15/16" H 7 3/4" W 8 1/8" D
4.92cm H 19.68cm W 20.64cm D
$17995each
Power and Style that Amplifies
The PA 330.2 is a two-channel class A/B amplifier with built-in fully variable high-pass and low-pass crossover capable of producing 75 Watts x 2 RMS continuous power @ 4 ohm. It’s also capable of bridged one-channel operation with a maximum power of 300 Watts into 4 ohms.
PA330.2 Features:
Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers.
High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.
Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.
6-way Smart System Protection (SSP) circuits
Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency.
Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump.
Variable input gain optimizes match with different signal sources (175mv to 8V).
RCA outputs for easy daisy chaining of other amplifiers.
Mounting hardware with rubber isolation grommets and extra fuse included.
Light bar/fan output-connect an optional LED light bar or cooling fan for custom installations.
Multi-color status LED gives instant information on amplifier operation.
Electrical | |
|---|---|
| Total Frequency Response | 10Hz-30kHz |
| Signal-to-noise (Referenced to rated power) | 80 dBA |
| Remote Gain | no |
| Minimum Impedance Bridged | 4 ohms |
| Minimum Impedance Not Bridged | 2 ohms |
| Protection Circuitry | 25 Amp ATC fuse, reverse polarity, thermal and DC offset |
| High Pass Filter | |
| Filter Slope | 12dB/oct |
| Low Pass Filter | |
| Filter Slope | 12dB/oct |
| Effective Damping Factor | >100 |
| CEA2006 Rating | 200 watts / 4 ohms |
| Input Impedance | 15 k ohms |
| Max Sensitivity | 175mV - 8 dB |
Dimensions | |
|---|---|
| Product Weight (each) | 4.70 pounds |
| With Panels | |
| Height | 1 15/16" (4.92cm) |
| Width | 7 3/4" (19.68cm) |
| Depth | 8 1/8" (20.64cm) |
Amplifier Specs | |
|---|---|
| Channels | 2 |
| Channel Notes | Bridgeable Class AB MOSFET |
| Total Dynamic Power | 300 watts |
| Bass Boost Characteristics | 3-position(0,6,12dB) Hz |
| 12V & Ground Cable Gauge | 4AWG |
Shipping | |
|---|---|
| Total Shipping Weight | 6.70 pounds |
Amplifier Power Specs | |
|---|---|
| RMS Power at 14.4V | |
| Watts per channel NOT bridged @ 1 kHz | |
| 4 ohms | 75 watts |
| 2 ohms | 100 watts |
| Watts per channel bridged | |
| 4 ohms | 200 watts |
| Dynamic Power at 14.4V | |
| Watts per channel NOT bridged @ 1 kHz | |
| 4 ohms | 150 watts |
| 2 ohms | 200 watts |
| Watts per channel bridged | |
| 4 ohms | 300 watts |
Specifications, dimensions and features subject to change without notice. For more information call us at 1-800-377-7655 (USA and Canada). Outside of North America call +1 (410) 358-3600.
PA330.2 Media
PA330.2 Literature
Want to know more? Want to dig just a little deeper to learn about this product? Here's a list of source material that will give more detail, other perspectives, and answer questions you may have.