High performance monoblock mobile audio amplifier

2" H 13 1/4" W 8 1/8" D
5.08cm H 33.66cm W 20.64cm D



Available Finishes:

Pure performance

The PA880 is a single-channel class A/B amplifier with built-in fully variable low-pass crossover. The PA880 monoblock is equipped with optional remote bass EQ control and is capable of one-channel operation with a maximum power of 800 Watts into 2 ohms.

PA880 Features:

Monoblock amplifier for subwoofer use.

300 Watts x 1 (4 ohm), 500 Watts x 1 (2 ohm).

CEA-2006 compliant specifications for true, accurate power ratings.

800 Watts x 1 (2 ohm) dynamic power.

2 ohm stable design can drive even the most demanding subwoofers.

Power and ground terminals accept bare wire up to 4 AWG. Terminals use standard #2 Phillips head screwdriver-no more hex wrenches to lose or strip!

High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.

Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.

6-way Smart System Protection (SSP) circuits.

Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump.

Switchable 180° phase inversion for easy sub to main integration.

RCA outputs for easy daisy chaining of other amplifiers.

Mounting hardware with rubber isolation grommets and extra fuses included.


Status LEDs give instant information on amplifier operation.


Total Frequency Response10Hz-30kHz 
Signal-to-noise (Referenced to rated power)80 dBA
Distortion at Rated Power0.9 %
Minimum Impedance Bridged4 ohms
Minimum Impedance Not Bridged2 ohms
Low Pass Filter
Filter Slope12dB/oct 
Filter Frequency50Hz-500Hz 
Effective Damping Factor>150 
Max Sensitivity200mV-5 dB


Product Weight (each)7.80 pounds
With Panels
Height2" (5.08cm) 
Width13 1/4" (33.66cm) 
Depth8 1/8" (20.64cm) 

Amplifier Specs

Channel NotesClass AB MOSFET 
Total Dynamic Power800 watts
Bass Boost Characteristics3-position(0,6,12dB) Hz
12V & Ground Cable Gauge4AWG 


Total Shipping Weight9.80 pounds

Amplifier Power Specs

RMS Power at 14.4V
Watts per channel NOT bridged @ 1 kHz
4 ohms300 watts
2 ohms500 watts
Dynamic Power at 14.4V
4 ohms500 watts
2 ohms800 watts

Specifications, dimensions and features subject to change without notice. For more information call us at 1-800-377-7655 (USA and Canada). Outside of North America call +1 (410) 358-3600.

PA880 Media

PA880 Literature

Want to know more? Want to dig just a little deeper to learn about this product? Here's a list of source material that will give more detail, other perspectives, and answer questions you may have.

PA880 Accessories