D class monoblock mobile audio amplifier
1 13/160" H x 13 5/16" W x 6 3/4" D
2.54cm H x 33.81cm W x 17.14cm D
Sleek, Compact, Powerful, and Really Cool
The PA D1000.1 offers an ultra-compact, minimalist design. A toroidal transformer helps keep the amplifier’s sleek aluminum extruded design under 2-inch tall while ensuring plenty of clean, efficient power. A low THD, a high signal-to-noise ratio, plus wide bandwidth frequencies, make the new PA D1000.1 a high performance monoblock for high performance bass.
PA D1000.1 Features:
Super-efficient class D design—Runs much cooler than conventional amps.
High-speed MOSFET switching—Power supply with outputs stable into 1 ohm loads.
Protection—Thermal, DC offset, reverse polarity and short circuit protection.
Variable low-pass filter: 40 Hz-220 Hz.
Variable subsonic filter: 20 Hz-38 Hz.
Bass boost at 0 dB-12 dB.
Bass boost at 44 Hz.
Remote subwoofer level control.
Nickel-plated wire terminals & RCA connectors—Ensure maximum signal transfer.
Level control—Adjusts the gain of the channel to match the output voltage from your head unit.
Line level outputs—Provides a full range signal for easy connection to additional amplifiers.
Stainless steel hardware—Used throughout
All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime.
|Total Frequency Response||20Hz-200Hz|
|Signal-to-noise (Referenced to rated power)||105 dBA|
|Distortion at Rated Power||<0.1 %|
|Minimum Impedance Not Bridged||1 ohms|
|Protection Circuitry||Thermal, DC offset, reverse polarity and short circuit; three 30 Amp ATC fuses|
|Low Pass Filter|
|Effective Damping Factor||>150|
|Max Sensitivity||200mV-6V dB|
|Height||1 13/160" (2.54cm)|
|Width||13 5/16" (33.81cm)|
|Depth||6 3/4" (17.14cm)|
|Product Weight (each)||6.5 lbs. pounds|
|Height||1 13/16" (4.60cm)|
|Width||12 15/16" (32.86cm)|
|Depth||6 3/4" (17.14cm)|
|Channel Notes||Class D MOSFET|
|Bass Boost Characteristics||44Hz Hz|
|12V & Ground Cable Gauge||4AWG|
Amplifier Power Specs
|RMS Power at 14.4V|
|Watts per channel NOT bridged @ 1 kHz|
|4 ohms||500 watts|
|2 ohms||800 watts|
|1 ohm||1200 watts|
Specifications, dimensions and features subject to change without notice. For more information call us at 1-800-377-7655 (USA and Canada). Outside of North America call +1 (410) 358-3600.
2 reviews with an average of 5Write your own review
by Justin Packer, September 2, 20124 out of 4 people found this review helpful.
never gets hot and the rms say it a 1000 but we test it and it reads 1200 so its more then it say it is!
dont have any!
best amp im ever owned!
PA D1000.1 Media
PA D1000.1 Literature
Want to know more? Want to dig just a little deeper to learn about this product? Here's a list of source material that will give more detail, other perspectives, and answer questions you may have.