PA D2000.2

Super-efficient class D bridgeable 2-channel mobile audio amplifier

1 13/16" H x 8 1/4" W x 6 3/4" D
4.60cm H x 20.96cm W x 17.14cm D



Available Finishes:
Buy Now Find a Dealer
Additional Images

Sleek, Compact, Powerful, and Really Cool

The PA D 2000.2 is capable of bridging a left and right terminal into a single full range channel with higher output power. For instance, the L-/R+ channels when wired correctly will increase the output power from 125W per channel to a 500W channel (for a 4 ohm load). The most common hookups are two full-range channels or a bridged subwoofer channel.

PA D2000.2 Features:

Super-efficient class D bridgeable design—Runs cooler than conventional amps.

High-speed MOSFET switching power supply.

Toroidal transformers—Help keep the amplifier’s sleek design under 2 tall while ensuring plenty of clean, efficient power.

Protection—Thermal, DC offset, reverse DC voltage and short circuit protection.

FULL, HPF, BPF switch—Selects full range, high pass filter, or band-pass filter for dialing in your crossover for the ideal speaker blending.

Adjustable low & high pass frequency range—Enables you to fine tune the blending of your speakers in their frequency range overlap.

Level control—Adjusts the gain of the left and right channels to match the output voltage from your head unit.

Line level inputs—Accepts line level input from a head unit, preamplifier or, equalizer.

Line level outputs—Provides a full range signal for easy connection to additional amplifiers.

Nickel-plated wire terminals & RCA connectors—Ensure maximum signal transfer.

Stainless steel hardware—Used throughout won’t corrode in humid environments.


Total Frequency Response20Hz-20kHz 
Signal-to-noise (Referenced to rated power)105 dBA
Distortion at Rated Power<0.1 %
Minimum Impedance Bridged4 ohms
Minimum Impedance Not Bridged2 ohms
Protection CircuitryThermal, DC offset, reverse DC voltage and short circuit protection; two 25 amp ATC fuses 
High Pass Filter
Filter Slope12dB/octave 
Filter Frequency20Hz-4kHz 
Low Pass Filter
Filter Frequency50Hz-5kHz 
Effective Damping Factor>100 
Max Sensitivity200mV-6V dB


Cabinet Dimensions
Height1 13/16" (4.60cm) 
Width8 1/4" (20.96cm) 
Depth6 3/4" (17.14cm) 
Product Weight (each)3.75 pounds
With Panels
Height1 13/16" (4.60cm) 
Width8 1/4" (20.96cm) 
Depth6 3/4" (17.14cm) 

Amplifier Specs

Channel NotesBridgeable Class D MOSFET 
12V & Ground Cable Gauge4AWG 

Amplifier Power Specs

RMS Power at 14.4V
Watts per channel NOT bridged @ 1 kHz
4 ohms125 watts
2 ohms250 watts
Watts per channel bridged
4 ohms500 watts

Specifications, dimensions and features subject to change without notice. For more information call us at 1-800-377-7655 (USA and Canada). Outside of North America call +1 (410) 358-3600.

PA D2000.2 Media

PA D2000.2 Literature

Want to know more? Want to dig just a little deeper to learn about this product? Here's a list of source material that will give more detail, other perspectives, and answer questions you may have.

PA D2000.2 Accessories