PA 330.2

High-performance 2-channel mobile audio amplifier 

Manual/Downloads
  • Free ground shipping on all orders

Power and Style that Amplifies

The PA 330.2 is a two-channel class A/B amplifier with built-in fully variable high-pass and low-pass crossover capable of producing 75 Watts x 2 RMS continuous power @ 4 ohm. It's also capable of bridged one-channel operation with a maximum power of 300 Watts into 4 ohms.

PA330.2 Features:

  • Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers.
  • High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.
  • Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.
  • 6-way Smart System Protection (SSP) circuits
  • Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency.
  • Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump.
  • Variable input gain optimizes match with different signal sources (175mv to 8V).
  • RCA outputs for easy daisy chaining of other amplifiers.
  • Mounting hardware with rubber isolation grommets and extra fuse included.
  • Multi-color status LED gives instant information on amplifier operation.
  • Tech Specs
  • Reviews
  • Q & A
  • Support
Tech Specs

Overall

  • Total Pieces
    1

Warranty

  • Electronics Warranty
    1 years
  • Original Purchaser Only
    Yes

Amplifier

  • Type
    Bridgeable Class AB MOSFET
  • Channels
    2/1
  • RMS Continuous Power @ 4 Ohm
    75 x 2
  • RMS Continuous Power @ 2 Ohm
    100W x 2
  • RMS Continuous Power Bridged @ 4 Ohm
    200W
  • Dynamic Power @ 4 Ohm
    150W x 2
  • Dynamic Power @ 2 Ohm
    200W x 2
  • Dynamic Power Bridged @ 4 Ohm
    300W
  • Dynamic Peak Power
    300W
  • Distortion at Rated Power
    <0.9%
  • Externally Bridgeable
    No
  • Remote Gain Functions
    No
  • Remote Gain Control Included
    n/a
  • Minimum Impedance Bridged
    4 Ohm
  • Minimum Impedance Unbridged
    2 Ohm
  • Signal-to-Noise Ratio
    80dB
  • Frequency Response
    10Hz - 30kHz +/- 0.5dB
  • Linear Bandwidth
    10Hz - 30kHz +/- 3dB
  • Damping Factor
    >100
  • Crossover Filter Slope (dB/octave)
    12dB/octave
  • Crossover Switch
    3 Position (LPF, Full, HPF)
  • Crossover Frequency Range
    50Hz-500Hz
  • Bass Boost
    3-Position (0dB, 6dB, 12dB)
  • Bass Boost Frequency
    42Hz
  • High Level Inputs
    Yes
  • Line Level Inputs
    Yes
  • Line Level Outputs
    No
  • LED Power Indicator
    Yes
  • LED Protection Indicator
    Yes
  • Input Impedance
    >15k Ohm
  • Input Sensitivity
    175mV - 8V
  • Supply Voltage
    14.4v
  • Fusing and Power
    1x 25 Amp FTC
  • Power Connections
    4 AWG
  • Ground Connections
    4 AWG
  • Speaker Connections
    12 AWG
  • Height
    1.94" (4.93 cm)
  • Width
    7.75" (19.69 cm)
  • Depth
    8.12" (20.62 cm)
  • Weight
    4.7 lbs (2.13 kg)
Reviews
Q & A
Support

Product Documentation