Popular searches
Manuals + Downloads
PAampDXi_MN
Specifications
OVERALL
- Total Pieces:1
- Electronics Warranty:1 years
AMPLIFIER
- Type:Bridgeable Class AB MOSFET
- Channels:2/1
- RMS Continuous Power @ 4 Ohms:75 x 2
- RMS Continuous Power @ 2 Ohms:100W x 2
- RMS Continuous Power Bridged @ 4 Ohm:200W
- Dynamic Power @ 4 Ohm:150W x 2
- Dynamic Power @ 2 Ohm:200W x 2
- Dynamic Power Bridged @ 4 Ohm:300W
- Dynamic Peak Power:300W
- Distortion at Rated Power:<0.9%
- Externally Bridgeable:No
- Remote Gain Functions:No
- Remote Gain Control Included:n/a
- Minimum Impedance Bridged:4 Ohm
- Minimum Impedance Unbridged:2 Ohm
- Signal-to-noise Ratio:80dB
- Frequency Response:10Hz - 30kHz +/- 0.5dB
- Linear Bandwidth:10Hz - 30kHz +/- 3dB
- Damping Factor:>100
- Crossover Filter Slope (dB/octave):12dB/octave
- Crossover Switch:3 Position (LPF, Full, HPF)
- Crossover Frequency Range:50Hz-500Hz
- Bass Boost:3-Position (0dB, 6dB, 12dB)
- Bass Boost Frequency:42Hz
- Line Level Outputs:No
- Input Impedance:>15k Ohm
- Input Sensitivity:175mV - 8V
- Supply Voltage:14.4v
- Fusing and Power:1x 25 Amp FTC
- Power Connections:4 AWG
- Ground Connections:4 AWG
- Speaker Connections:12 AWG
- Height:1.94" (4.93 cm)
- Width:7.75" (19.69 cm)
- Depth:8.12" (20.62 cm)
- Weight:4.7 lbs (2.13 kg)
